Home | Discussion Board | History | Technical | Links | Store | About Us | Email

Stuart Marine engines

Stuart Turner p55
This is an amazing display for an inboard engine. It is a Stuart Turner P55, installed in a cutaway portion of a boat. I have never seen anything like it. The engine (and partial boat is owned by Peter Ogborne of Australia.
Click on the photo to enlarge it.
Stuart Turner
A cutaway drawing of the Stuart Turner P55

An unrestored P55 belonging to Andrew Menkart
An unrestored P55 belonging to Andrew Menkart

Here are some pictures of a Stuart Turner R3 that Mike and Ernie are working on:

Stuart Little Left.jpg (42379 bytes) Stuart Little Rt.jpg (41636 bytes) Stuart Little Rtsmall.jpg (21542 bytes) apart_in_box.jpg (33576 bytes) apart_on_table.jpg (33483 bytes) base_on_table.jpg (33602 bytes) cyl_in_box.jpg (32229 bytes)

P5 belonging to Peter Ogborne
A P5 belonging to Peter Ogborne mounted in a "cutaway" boat !

Parts for the Stuart Marine engines are currently available from:

Fairways Marine Engineers
Bath Place Wharf, Downs Road
Maldon, Essex  CM9 7HU
England
(tel)  +44 (0) 1621 852866
www.fairwaysmarine.com

 

Home | Discussion Board | History | Technical | Links | Store | About Us | Email
Copyright ©
1999 - 2013 All rights reserved.  
No material from this site may be reproduced for commercial use without written permission of:
OldMarineEngine.com 184 Jones Dr, Brandon, VT  05733 | phone: 802-247-4700 | email: [email protected]