Thrust bearings clae 4.5 hp

Author Message   William Vlies New member Username: billv Post Number: 1 Registered: 06-2007 Posted on Monday, October 19, 2009 - 02:11 am:        Hi. Im reliably told I need to fit a thrust race to this and all motors. I cant find any evidence of a thrust race being fitted to this one.It appears to connect straight to the cluth. Nor can I find where it would bear on or fit near the motor. If I fit it after the cluth any movemnet(in the mounting) no mater how small would negate the load bearing actiity of the race. Further on examanimation of other bits and pieces of various small motors I cannot find evidence of bearings. I have seen the blaxland twin thrust set up. Is it possible that some smaller motors do without. help   William Vlies New member Username: billv Post Number: 2 Registered: 06-2007 Posted on Tuesday, October 20, 2009 - 01:55 am:        Hi. Im reliably told I need to fit a thrust race to this and all motors. I cant find any evidence of a thrust race being fitted to this one.It appears to connect straight to the cluth. Nor can I find where it would bear on or fit near the motor. If I fit it after the cluth any movemnet(in the mounting) no mater how small would negate the load bearing actiity of the race. Further on examanimation of other bits and pieces of various small motors I cannot find evidence of bearings. I have seen the blaxland twin thrust set up. Is it possible that some smaller motors do without. help

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Automatically activate URLs in message Action:

Administration Log Out   Previous Page Next Page