| Author |
Message |
    
Richard
New member
Username: em2
Post Number: 1
Registered: 04-2015
| | Posted on Monday, April 27, 2015 - 03:20 pm: | 
|
Hi, bought a boat with ST P66 installed, runs beautifully. Came across a complete new gasket set on board. Anyone interested?
The engine has all original paperwork, was rebuilt I think about 8 years ago, may sell this too if any interest. |
Ian Z. Yannakodimos
Member
Username: ianromano
Post Number: 4
Registered: 03-2015
| | Posted on Monday, April 27, 2015 - 04:44 pm: |
|
Me, but tell me if it's compatible with the P5 ME engine, and if you also have a piston and a pushrod for that engine |
Richard
New member
Username: em2
Post Number: 2
Registered: 04-2015
| | Posted on Monday, April 27, 2015 - 07:17 pm: |
|
Hi, not an expert so unsure if will fit your engine. I would ask in the technical section to satisfy yourself as to compatibility. No spare engine parts, just a spare gasket set or the whole engine, and gearbox...and shaft...and dynostarts etc. |
David Myers
Senior Member
Username: dave_myers
Post Number: 132
Registered: 11-2006
| | Posted on Tuesday, April 28, 2015 - 03:04 am: |
|
No... the gaskets are totally different to the P5. The P66 is twin cylinder and the P5 is a single. No gaskets are compatible. |
Richard
New member
Username: em2
Post Number: 3
Registered: 04-2015
| | Posted on Tuesday, April 28, 2015 - 09:52 am: |
|
Hi, my ST P66 gasket set is now on ebay:
http://www.ebay.co.uk/itm/181729570625?ssPageName=STRK:MESELX:IT&_trksid=p3984.m 1555.l2649 |
snod grass
Visitor
| | Posted on Tuesday, April 28, 2015 - 05:04 pm: |
|
With the greatest respect I think �200 is a silly price. I picked up a working engine for �50 last year. |
David Myers
Senior Member
Username: dave_myers
Post Number: 133
Registered: 11-2006
| | Posted on Wednesday, April 29, 2015 - 01:50 am: |
|
Where is the Head Gasket? It is not a full kit without that.. Probably worth about *5 pounds. It is a large Grey gasket the same shape as the base gasket but without the transfer cutouts. Sorry about that... |
