|
| Author |
Message |
    
Greg Chalmers
| | Posted on Thursday, November 28, 2002 - 06:37 pm: | 
|
I'm after a Stuart Turner P55 hopefully in reasonable condition or restorable on the east coast of Australia. I'm prepared to pay a suitable price as i want to build a "last" boat with my aged dad who, as a boat builder for many of his younger years, used this motor with the greates of reliability |
Tim Mulvey
| | Posted on Friday, November 29, 2002 - 02:02 am: |
|
I know of someone who knows someone else - sound familiar? - I'm doing up a couple myself.
I'll email you directly next week. |
peter ogborne
| | Posted on Saturday, November 30, 2002 - 06:49 am: |
|
Thanks Tim , Greg rang me a couple of days ago , I suggested to him that he should be able to get what he wants a little nearer to home . I think i know where there is one here in Perth but freight tp Queensland would be very expensive .........good to see the network working . |
Tim Mulvey
| | Posted on Saturday, November 30, 2002 - 03:55 pm: |
|
Yes, I thought Perth was a bit far though I was keen enough to pay the freight and very happy with what Steve sold me, gave me and organised for me - five engines and about half a pallet of parts that all up should make maybe at least two good engines with plenty of parts over.
I've sent him an email about Greg's interest in an ST but I have a lead on at least one on the Eastern seaboard but I don't know whether the trail is cold. It will take a week or two to followup a few people.
PS: The ST info in the post to you. |
wombat
| | Posted on Sunday, December 15, 2002 - 06:36 pm: |
|
I have one that is rebuilable, but will need a fair bit of work, not sure if it's worthwhile.
contact me via e-mail.
Regards,
Rob Simons |
Peter cowie
| | Posted on Wednesday, December 25, 2002 - 04:38 pm: |
|
I have a rebuilt crankshaft with new roller bearings available. Several other parts also available after the engine block "exploded" with rust
Peter Cowie
Sydney |
James Byrne
| | Posted on Monday, February 03, 2003 - 09:56 pm: |
|
I have P55m in Melbourne and am happy to discuss any proposal.I took the motor out of a boat about 15 years ago and it has been in storage since. |
David Purtle
| | Posted on Wednesday, June 04, 2003 - 04:16 am: |
|
Hi
Has anyone have a Stuart Turner p5m for sale or books,parts ect. I'm in Victoria and am doing one up and need any info I can get.
david |
Tim Mulvey
| | Posted on Wednesday, June 04, 2003 - 06:05 am: |
|
David,
I keep on tripping over your messages. You are certainly getting some good coverage via the various sites you've used (for others this is the third forum). However, I bet you haven't yet found my advertisement for Stuart Turners in the Old Machinery Magazine (Australia).
I won't add much more to what I already mentioned in the other messages, easier to talk on the phone. |
terry McCann
| | Posted on Wednesday, January 07, 2004 - 08:08 am: |
|
Can anyone help with diagrams, info, such as dates of manufacture, hp rating, correct carb for marine use, stripping manual, in fact any info at all. I am restoring our yacht club tender in Simons Town, South Africa( as we've given up on rugby for a while!) and want to convert the current 100 kilograms of revolving scrap iron and brass into a Stuart Turner P55.
Any info will be appreciated. |
andrew
| | Posted on Wednesday, January 07, 2004 - 08:18 am: |
|
Terry,
If you send a note to Fairways Engineers in England they will tell you the date of manufacture and original delivery info.
They also sell the manual for the P55 as well as parts. You might also be able to get a copy of the manual elsewhere, it is not very large.
Regards,
Andrew |
Tim Mulvey
| | Posted on Wednesday, January 14, 2004 - 01:47 am: |
|
Terry, I can help you with whatever info you seek. I sent you an email direct...... |
poker casino965
Visitor
| | Posted on Monday, March 06, 2006 - 04:14 pm: |
|
poker casino poker 516 |
|
|
|
|
