|
| Author |
Message |
    
david_woodworth
New member
Username: david_woodworth
Post Number: 1
Registered: 05-2012
| | Posted on Wednesday, August 29, 2012 - 07:59 pm: | 
|
I need to set up a water pump on a 2cycle motor 5hp for a heat exchanger. Has any one any words of wisdom? what kind of pump how to tool it up ect. THANK YOU |
jb_castagnos
Senior Member
Username: jb_castagnos
Post Number: 718
Registered: 07-2002
| | Posted on Wednesday, August 29, 2012 - 09:56 pm: |
|
David, a gear pump would work, won't pump in reverse unless you include 4 check valves, but it's easier to locate and install. The piston pump would have to have an eccentric on the propeller shaft, mounting and alignment would be more critical. |
jb_castagnos
Senior Member
Username: jb_castagnos
Post Number: 719
Registered: 07-2002
| | Posted on Wednesday, August 29, 2012 - 09:58 pm: |
|
David, a gear pump would work, won't pump in reverse unless you include 4 check valves, but it's easier to locate and install. The piston pump would have to have an eccentric on the propeller shaft, mounting and alignment would be more critical. |
|
|
|
|
