|
| Albin 021 Water Pump problems |
| Author |
Message |
    
allan_lambert
Member
Username: allan_lambert
Post Number: 13
Registered: 08-2007
| | Posted on Sunday, August 19, 2012 - 07:11 am: | 
|
Hello, I need some advice, my engine is not getting water. I removed the tubing from outlet of the water pump and when engine is running water comes out of the outlet of the water pump. When I reconnect the tubing no water goes into the block or comes out the exhaust.I have checked that there are no blockages in the block,head or any of the hoses/tubing. It seems that the water pump doesn't have enough pressure to pump water through the system. Also checked in the water pump and can feel impeller turning. - |
Thomas Davidson
Visitor
| | Posted on Monday, August 20, 2012 - 12:40 pm: |
|
Take the pump from the engine and check the drive brake pin. If pump have been blocked this pin will brake.
Regards
Thomas Davidson |
|
|
|
|
