|
| Replacement piston rings; Who has a s... |
| Author |
Message |
    
Tom Stranko
| | Posted on Saturday, September 27, 2003 - 12:53 pm: | 
|
I need some of the "fat" style rings for my Stanley/Emmons single.
The ring is 11/32" high and .185" thick. The bore is 4" and I need them at least 5 thou oversize. I spent what free time I had this week hitting the auto part and machine shops but if you can't tell them its a Chevy or a Volvo they loose interest.
Someone MUST have found a source for the old big size rings??
Thanks
Tom |
richarddurgee
| | Posted on Saturday, September 27, 2003 - 01:44 pm: |
|
http://www.dol.net/~dave.reed/otto.html
If it's not in stock Dave will make it for you ! |
Tom Stranko
| | Posted on Thursday, October 02, 2003 - 06:53 pm: |
|
I had exceptional luck with Paul Weaver in Bremerton Wa. Fast, reasonable. Email me off-list for his numbers |
Jeff Miley
| | Posted on Saturday, January 10, 2004 - 08:06 pm: |
|
If you are looking for odd rings try Niagara Piston Ring Works. 814-664-9233. I needed odd size rings for a Gray Stationary engine that were almost a half inch wide. Niagara makes rings from 3/4" to 144" in diameter and any width. They are also the manuafactuer not just someone who carries rings made by someone else. Had mine in about 10 days. |
|
|
|
|
