|
| Author |
Message |
    
raa
New member
Username: raa
Post Number: 3
Registered: 02-2007
| | Posted on Monday, August 31, 2009 - 10:28 pm: | 
|
If anyone needs a flywheel for a waterman K2 K1 or
D1 I have two. One is a new casting which has the lug to mount a timer switch if required. The casting is not machined and has a slightly thicker rim so a D2 will idle a little better. I made a pattern and had 4 cast last winter 1 for my Dippy and one went on a early K1?? ca.1910 and one is heading for Canada leaving one extra. They were cast out of 35000 psi good cast iron. The foundry charged me $50 ea. so anyone needing on can have it for $50 plus shipping.
The other flywheel is the original K2 flywheel and is not cracked and could be used just as is.
If you have a K1 and need a lug to mount the timer
switch you will need to do a little c clamp engineering. I am asking $30 plus the shipping.No charge to box etc.
If you have any questions feel free to email me. |
miro
Senior Member
Username: miro
Post Number: 390
Registered: 11-2001
| | Posted on Tuesday, September 01, 2009 - 09:40 am: |
|
Tried to email you but it bounced.
[email protected]
Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 Recipient Rejected: No account by that name here (state 14). |
|
|
|
|
