|
| Evinrude two cylinder - magneto help |
| Author |
Message |
    
dick
Member
Username: dick
Post Number: 9
Registered: 07-2004
| | Posted on Wednesday, December 31, 2008 - 03:38 pm: | 
|
I have an Evinrude inboard, two cylinders (separate), with serial number DD65758. I have the flywheel (although one of the two lobes of the 'cam' has been ground off!?) but, most importantly, the magneto in its entirety is missing. I am hoping someone might be able to tell me about the magneto part - does anyone have any ideas about what might fit into this flywheel? I read in an earlier post that the mag from a 1926 Evinrude model N (Sportwin? or Sport Twin?) outboard would fit….does anyone know for sure?...or possibly any of the N series from 1923 to 1928? The distance between the two curved magnets in the interior of the flywheel is about 6 ¼ inches. I am also missing the whole exhaust manifold, so of course I am on the lookout for that as well.
I thank you in advance for any possible help you can provide.
Best regards,
Dick Briggs
 |
kerrigan
Member
Username: kerrigan
Post Number: 9
Registered: 06-2008
| | Posted on Wednesday, December 31, 2008 - 04:53 pm: |
|
Try this Houston firm:
http://www.outboard-parts.com/ns5/index.htm |
hamp_phillips
Member
Username: hamp_phillips
Post Number: 4
Registered: 04-2007
| | Posted on Wednesday, December 31, 2008 - 05:10 pm: |
|
My neighbor may be able to help. His name is Denny Johnson and his number is 360-779-1989.
Hamp Phillips |
dick
Member
Username: dick
Post Number: 10
Registered: 07-2004
| | Posted on Sunday, January 04, 2009 - 02:18 pm: |
|
Thank you both very much; I will follow up on these suggestions. Does anyone know the date of manufacture - or where I could find it?
Thanks again, Dick |
|
|
|
|
