|
| Author |
Message |
    
richarddurgee
Senior Member
Username: richarddurgee
Post Number: 773
Registered: 11-2001
| | Posted on Wednesday, May 25, 2005 - 11:51 am: | 
|
Robert McCleery's 17' Surfboat with the "Fishermans Favorite" 4 Hp Atlantic that he installed in it recently!
Robert is looking for an original ad of the Atlantic !
Great looking outfit !
 |
miro
Senior Member
Username: miro
Post Number: 176
Registered: 11-2001
| | Posted on Monday, June 06, 2005 - 03:51 pm: |
|
The engine bed looks good and solid - Does the engine shake the boat under way? |
beardedskipper
Member
Username: beardedskipper
Post Number: 4
Registered: 02-2005
| | Posted on Tuesday, June 07, 2005 - 01:01 am: |
|
The vibration of these engines is not to bad at about 500 rpm, the key is to load them enough to keep the rpm down, this is a light boat ment for rowing with fair lines. The engine is able to turn a 4 blade 17" prop with a 15" pitch . vibration is very exceptable and there's no seams to open up. the bed is bolted through the keel and set with an epoxy mix. I've run it quite a few hours and no sign of any cracking. |
poker casino724
Visitor
| | Posted on Monday, March 06, 2006 - 07:12 pm: |
|
poker casino poker 663 |
|
|
|
|
