|
| Author |
Message |
    
finfever1
Member
Username: finfever1
Post Number: 13
Registered: 11-2004
| | Posted on Monday, March 07, 2005 - 08:32 am: | 
|
I have a model 620 with a carter bb-1 carb the manuel "owner's " calls for a 3/64 float height. The problem that i get is gas weeeping out around the gasket of the parting surface. I had the carb rebuilt and they set the float at about 1/4 inch. Now it is very hard starting and the plugs are getting very wet. The engine sits at about a 10-13 degree angle. Can anyone help me with the right float setting at this angle .
thanks JOHN |
|
|
|
|
