| Author |
Message |
    
Robert Holtzer
| | Posted on Thursday, January 31, 2002 - 07:30 pm: | 
|
Anyone familiar with the Ruggerini Motori RDM 901 single cylinder (500cc) marine diesel? |
andrew
| | Posted on Thursday, January 31, 2002 - 07:52 pm: |
|
Robert,
I have some basic specs for the Ruggerini RDM 901 of:
Quote:90mm x 85mm
541 cm3
8.8kW or 11.8 HP at 2800RPM
It seems that Ruggerini is still in business and might have some info for you.
Or maybe someone else here is familiar with it.
Regards,
Andrew |
Robert L. Holtzer
| | Posted on Sunday, February 03, 2002 - 12:12 pm: |
|
Thanks, Andrew. I have the basic information and a parts list courtesy of Deutch (USA) and Ruggerini (Italy) parts department. I am looking for an operation manual and persons with some hands-on experience with these engines. I understand the U.S. Air Force used a non-marine version of the engine some years back. However, this was essentially hearsay.
Your interest is appreciated.
Bob Holtzer |
Stig Pettersen
| | Posted on Friday, July 11, 2003 - 07:07 pm: |
|
Have a ruggerini RDM 901
Never started with full manual for motor
with dynastarter.
My engine have separate alternator and starter
For more info
E-mail: [email protected] |
joerg moebius
| | Posted on Wednesday, April 14, 2004 - 03:17 am: |
|
cylinder head of a Ruggerini RM 278 (2 Cyl.)
Hi,
I am looking for a cylinder head. Does anybody know where to get?
Might be interesting:
Ruggerini is not in business anymore. Lombardini (also an italian motor producer) has bought the rests of Ruggerini. allpa in the netherlands is the Ruggerini chief agency for europe. allpa deals only with commercial partner, but they will give contacts to service partner (I met them on the Hanseboot in Hamburg this yeas).
Regards
Joerg Moebius |
markmif
| | Posted on Wednesday, June 02, 2004 - 04:03 am: |
|
I am looking for the manual of Ruggerini RM90.
Can anyone send me a copy? |
dennis kohlmeier
| | Posted on Wednesday, June 02, 2004 - 11:03 pm: |
|
wanted ruggerini rd 901, also need manual for same. 6-2-04. thanks for any info. dennis |
Vicen�
Visitor
| | Posted on Tuesday, July 13, 2004 - 02:47 pm: |
|
I am looking for the manual of ruggerini MM150 can anyone sent mi a copy ?
thanks |
MStoneRD185
Visitor
| | Posted on Wednesday, August 04, 2004 - 01:35 pm: |
|
Looking for information, guidence and a manual for an RD 185 Ruggerini or ARONA (??)Marine Inboard. Is there a relationship between Ruggerini and Arona ?
New to me.THX Mike |
Roberto Ferrario
Visitor
| | Posted on Tuesday, September 07, 2004 - 04:40 pm: |
|
I�m looking for ruggerini motors parts model RDM 901. Any idea?
Part N�: 468-29 Quantity:1
Part N�: 708-16 Quantity:2
Thanks
Robert |
Sania
Visitor
| | Posted on Wednesday, September 22, 2004 - 03:54 am: |
|
I am looking for the manual of ruggerini RD270 can anyone sent me a copy.
thanks |
cesar pedrozo
Visitor
| | Posted on Wednesday, September 29, 2004 - 10:24 pm: |
|
Y am looking for information,guidance and a manual for an RM 80 Ruggerini Diesel Marine Inboard. Many thanks. |
diud
New member
Username: diud
Post Number: 1
Registered: 10-2004
| | Posted on Sunday, October 31, 2004 - 09:44 am: |
|
can anyone help me by telling me what kind of alternator and starter do i need for Ruggerini RDM 90 0.5 ??
Thank you !
[email protected] |
beau
New member
Username: beau
Post Number: 1
Registered: 11-2004
| | Posted on Thursday, November 18, 2004 - 11:43 am: |
|
Hello,
I'm looking for any information about a ruggerini rm90. Experience will do as well.
Problem i have with this engin is that it will not heat up when running. It just stays below 38�c |
l_ee_waddell
Member
Username: l_ee_waddell
Post Number: 4
Registered: 08-2004
| | Posted on Thursday, November 18, 2004 - 10:35 pm: |
|
Well, I'll tell ya wht I know and that's an engine is an engine is an engine is an engine. Enjoy it! Take out any thermostats if any and run as many RPM's as you like, that is, as long as there aren't any temp gauges lyin to ya. Sounds like you might have it made. The time to worry is when the temp is too high. Make sure the guages aren't lyin and then let everybody know. |
beau
New member
Username: beau
Post Number: 2
Registered: 11-2004
| | Posted on Friday, November 19, 2004 - 04:06 am: |
|
Take out any thermostatic valve? That way it will not even heat up to 38�c. Running at full speed with a very cold engine? Doesnt sounds too healthy for the engine to me. I bet it will start using oil in no time if you do that frequently. I checked all the guages and they are working fine.
Anyway i might have found the problem, the bypass over the engine which goes directly to the exhaust manifold was almost completely blocked.
Perhaps because of that the pressure to the thermostatic valve was bigger so more water was forced to pass the thermostatic valve? (engine has direct cooling) |
l_ee_waddell
Member
Username: l_ee_waddell
Post Number: 5
Registered: 08-2004
| | Posted on Saturday, November 20, 2004 - 12:22 pm: |
|
Ya what was I thining about? It's already not warming up, sounds dislexic. Don't trust those guages too much though. Curious however, how do you suppose that bypass got blocked? Direct cooling, no strainers? Was the exhaust manifold any warmer because of it? |
beau
New member
Username: beau
Post Number: 3
Registered: 11-2004
| | Posted on Saturday, November 20, 2004 - 06:38 pm: |
|
Well, i found out that is was almost completely blocked because i unscrewed some sort of hollow bold (called "eye" in the manual) which devides the cooling currunt in two. One directly to the exhaust manifold, the other to the engine. The outlet of that bold to the bypass was chalked up.
I verified the temperature guage and it is working correctly. (Tested it in a glass of hot water with a thermometer.)Exhaust manifold colder now? Dont know, didnt checked it but i can see that more water is coming out of exhaust pipe. Only one strainer and thats placed before the waterpump. |
l_ee_waddell
Member
Username: l_ee_waddell
Post Number: 6
Registered: 08-2004
| | Posted on Sunday, November 21, 2004 - 01:18 pm: |
|
Sounds like yer in perty good shape in spite of things and at least you have a screen. Are there any zincs that screw into the jackets? |
beau
Member
Username: beau
Post Number: 4
Registered: 11-2004
| | Posted on Monday, February 14, 2005 - 02:12 pm: |
|
Yes, there a few zincs that screw into the engine block. |
mammalek
Visitor
| | Posted on Monday, February 28, 2005 - 08:48 pm: |
|
I LOOK FOR RUGGERINI RD92/2 MOTOR COUPLED TO GENSET WELDING GENERATOR ALL ELECTRICAL DIAGRAMS BEST THANKS |
nik
New member
Username: nik
Post Number: 1
Registered: 03-2005
| | Posted on Sunday, March 27, 2005 - 12:35 pm: |
|
I have an old 'Ruggerini' diesel boat engine, 2 cylinders, sea-water cooling system. No other engine's particulars are known.
I am interesting for an 'Operator's instructions manual' as well as for any possible information.
The motor is running well but it is in need of general onerhauling and any information shall be appreciated. Thanks |
beau
Member
Username: beau
Post Number: 5
Registered: 11-2004
| | Posted on Sunday, March 27, 2005 - 03:44 pm: |
|
Nik, what type of ruggerini? |
Ian Haykin
Visitor
| | Posted on Thursday, April 07, 2005 - 11:25 am: |
|
I have a Ruggerini RM270 water cooled Diesel Generator.When it starts I hear a pop,pop, sound and then it runs perfect. After about 15 min the engine starts to overheat. The coolant disapears out of the tank. I presume that the Head Gasget must have blown. Does anyone have any suggestions where I might obtain a new one? The water does not get into the oil system. |
beau
Member
Username: beau
Post Number: 6
Registered: 11-2004
| | Posted on Thursday, April 07, 2005 - 03:34 pm: |
|
And where exactly do you live? UK i presume?
greets |
Ian Haykin
Visitor
| | Posted on Friday, April 08, 2005 - 04:20 pm: |
|
I live in Toronto Canada |
Ron-Davis
Visitor
| | Posted on Wednesday, June 15, 2005 - 12:46 pm: |
|
I am the UK importer / distributor for Ruggerini Marine. Most spares are still available although there are no new engines. With regards to engine temperature; Any engine that is salt water cooled must NOT run over 50-53 deg.C or the salt will drop out of the water and block waterways. If the engine runs cold, it's safer than if it runs hot. To ensure good ring seal, etc. keep the revs up whenever you can. Regular slow running without heavy load, is not good for any engine. It's the combustion temperatures you are looking to keep up, not water jacket temps. After all, no diesel engine could run if the combustion temps were as low as the water jacket temps, even at 85 - 90 deg. You can always ring me during the working day on 44 (0)1305821175. |
beau
Member
Username: beau
Post Number: 7
Registered: 11-2004
| | Posted on Friday, July 08, 2005 - 04:15 pm: |
|
Ron, i agree with you on the salt dropping but it is not normal that the watertemp not even reaches 40�C (lowest readable value on the clock). The engin does not reach a proper combustiontemp. She alway produces a blue smoke.
Blue smokes means; running a cold diesel engine or burning oil as we all know. The fumes produced by the engin do not smell like burned oil at all and the oil level in the engin has not dropped a bit after several hours of running. So, engin running too cold. It might be safer to run at too cold temp instead of too hot but running at too cold temp will shorten the live of the engine by many many hours. If i run the engin at 3/4 for a couple of hours and then release power to stationary running she drops below stationary rpm. just the same as a cold start. After a few minutes with very little power she runs fine again. For those reasons the temp must go up to 50�C. As the thermostatic valve is designed for 50�C and opens/closes at 48�C (fully opend at 52�C)the temp must be around 50�C. I also got in contact with another rm 90 owner and his engine is running around 50�C so there is something wrong with mine. |
Miss Tekila
Visitor
| | Posted on Monday, September 12, 2005 - 12:09 pm: |
|
Who can help this lady?
Bought a welding machine at Lincoln they cannot help me if i do not have the parts number of Lincoln Ranger 8+ Diesel battery charger regulator.This partfrom a deutz engine dealer Lincoln used a Italian Engine for this unit called Ruggorini model RD201. HELP i need this part urgently who can help me????
Thank you |
landlordjord
New member
Username: landlordjord
Post Number: 1
Registered: 11-2005
| | Posted on Monday, November 21, 2005 - 05:36 am: |
|
i am looking for a ruggerini diesel rd270 and rd010 starter motor |
ABDUL MAJID
Visitor
| | Posted on Wednesday, November 23, 2005 - 10:52 am: |
|
I WANT RUGGERINI MOTOR/SPA
TYPE HT-51
NO 4O71/819478
CC 0260 VERSION 0407
RPM 3600
PLEASE SEND ME THE PHOTO,COST AND AVAILABILITY
THANK YOU. |
Bruce Lendrum
Visitor
| | Posted on Monday, December 26, 2005 - 05:16 am: |
|
What is the largest single cylinder Ruggerini diesel made for boats esp small tug boats: could it be sold in the USA as Duetch(sic) Diesel ( Deutch). And could it push a 20 foot x 8.5 beam Tug boat at 20 knots???? |
Petre NITA
Visitor
| | Posted on Wednesday, December 28, 2005 - 04:36 pm: |
|
I am looking for information,guidance and a manual for an one cylinder RF 140 Ruggerini Diesel engine(602ccm). Many thanks!
Don't wonder too much it arrives also in Romania! |
beau
Member
Username: beau
Post Number: 8
Registered: 11-2004
| | Posted on Thursday, December 29, 2005 - 11:33 am: |
|
Hello all.
At the moment they are rebuilding this site
http://www.ruggerini.it
thx |
Thorleif Holme
Visitor
| | Posted on Tuesday, January 24, 2006 - 08:08 am: |
|
I have a Ruggerini RDM 901....I am in need for a operating manual , would very much apreciate if someone could help here. |
Trajkovski Trajce
Visitor
| | Posted on Wednesday, February 15, 2006 - 04:23 pm: |
|
I'm looking for some parts of ruggerini serie RD80-81-RD 80/v.Thanks a lot of any information as soon as possible please |
George Dougherty
Visitor
| | Posted on Wednesday, March 22, 2006 - 10:36 pm: |
|
Can anybody help. I don't know anything about motors.
I am looking for a Manual for the RUGGERINI GENERATOR TYPE RDM90i.
The Model is probably RDM901
A friend of mine has asked me to find him one. He has written the following-
Type ROM 90i
RPM 2800
Matricola
000964
PMAX ESER CIZ 12
CONTINVAT IVA 11
ENGINE
0160 -000964
He would be happy with an EXPLODED VIEW OF THE ENGINE.
REGARDS, George |
Gary Mayclair
Visitor
| | Posted on Tuesday, April 11, 2006 - 01:13 am: |
|
Hello I have a single cylinder Ruggerini air cooled marine engine with a crashbox ( clutchless )it says 18hp at 3000 revs on the name plate. I think it also says RD 950....does anyone have any info on it..it looks quite old. |
john haber
Visitor
| | Posted on Thursday, April 27, 2006 - 06:58 am: |
|
looks like i may need a replacement injector pump for rd200 twin air cooled diesel.eng no 112293. any idea where to start looking? please email info [email protected]
if ron davis sees this , i tried to call you on 01305821175.no connection. new number pls ? |
Josef Koch
Visitor
| | Posted on Saturday, May 13, 2006 - 11:09 am: |
|
I am looking for part Nr 063-19, "Complete elastic pad" for a Ruggerini RDM 901, 10 HP. I am in Germany for the summer, need the part in New Zealand next winter. Any help out there? |
John E. hall
Visitor
| | Posted on Thursday, June 01, 2006 - 12:37 pm: |
|
RDM 901 for sale.Ten years ago We inherited an RDM 901, complete engine with accessorys,2:1 gear, mounted on a test bed/shipping base. The motor is zero time. Once a year I start it for fun:it runs fine. Make an offer |
pdp8user
New member
Username: pdp8user
Post Number: 1
Registered: 05-2006
| | Posted on Thursday, June 01, 2006 - 07:02 pm: |
|
What part of the world are you in, John? |
Snorre
Visitor
| | Posted on Tuesday, October 10, 2006 - 04:49 am: |
|
RDM 901/2 marine diesel motor for sale. The motor has been working 1115 h.
It is a 1982 mod. with a 2:1 gear, working well but cold need a total service.
Operating manual is following.
Price: 500 Euro. |
sailmaster
New member
Username: sailmaster
Post Number: 1
Registered: 11-2006
| | Posted on Thursday, November 09, 2006 - 06:57 am: |
|
I have a RDM 901 and need a piston & Rings. can anyone tell me were I can find them |
hawk
New member
Username: hawk
Post Number: 1
Registered: 08-2007
| | Posted on Thursday, August 09, 2007 - 09:48 am: |
|
hi i have a ruggerini rm200 diesel welder/generator it is air cooled...im lookin to rebuild my engine does anyone know hows the engine splits from the dyno?? |
Charlie Paradise
Visitor
| | Posted on Thursday, January 24, 2008 - 03:24 pm: |
|
I have a Ruggerini 12.5 HP diesel outboard; single cylinder; air cooled engine with numbers on it:
0324 600140
I am doing a complete restoration and need a parts manual and distributor for parts. I am in Baja Mexico but come back and forth from Arizona |
malta
Visitor
| | Posted on Sunday, February 10, 2008 - 02:19 am: |
|
Various marine watercooled & aircooled Ruggerini parts available - from Malta (europe)
contact [email protected] |
SalvageMan
Visitor
| | Posted on Sunday, March 16, 2008 - 09:49 pm: |
|
I found this while digging. The link should still be good, otherwise you can google for the filename:
IPB Ruggerini RM80-81-RDM901-121.pdf
It's a PDF with a full exploded parts diagram for the Ruggerini 901 engine.
http://www.masenorthamerica.com/sitemap1.php |
alanb
Visitor
| | Posted on Thursday, April 17, 2008 - 07:51 am: |
|
any info manual spares list ect for rm270 or 278 |
yofy
New member
Username: yofy
Post Number: 1
Registered: 07-2008
| | Posted on Wednesday, July 16, 2008 - 06:32 am: |
|
SalvageMan, I just checked out that manual and it was a great help thanks.
I still have a question. I have a Ruggerini RDM 901 diesel engine on my sailboat. I have just had the oil pressure drop suddenly. After some reasearch, I believe that oil regulating valve spring may have broken. While I've taken apart surrounding parts and the oil filter and the filter base, I can't find the placement of the valve itself.
Can anybody tell me where the oil regulating valve is situated on the RDM 901? |
enterpreneur
New member
Username: enterpreneur
Post Number: 1
Registered: 12-2008
| | Posted on Monday, December 01, 2008 - 04:15 am: |
|
I have ruggerini rd270..I want to sell some parts of this engine. I m gonna sell all parts of this engine except cylinders.If anyone wants to buy these parts please send me an e-mail..
Regards Seref Cakir |
J.P.B.
Visitor
| | Posted on Thursday, December 04, 2008 - 12:30 pm: |
|
I look for a textbook(manual worker) of installation for a generator Ruggerini RDM901.
Would have you a copy of this document to sell me.
Thank you.
J.P. Brunot |
enterpreneur
New member
Username: enterpreneur
Post Number: 2
Registered: 12-2008
| | Posted on Friday, December 05, 2008 - 04:30 am: |
|
unfortunately, I don't have textbook for RDM901..If i found, I would send to you.. |
andygoodwin
Visitor
| | Posted on Thursday, December 25, 2008 - 02:48 am: |
|
I am looking for a low oil pressure switch, for a RM 80 Ruggerini engine. Thread size 8mm.
On a Mase 3500kw generator.
Help to find this part would be good.
Regards Stuart Goodwin |
dfeaman
New member
Username: dfeaman
Post Number: 1
Registered: 01-2009
| | Posted on Wednesday, January 07, 2009 - 03:58 pm: |
|
I have a RDM 901ruggerini MASE generator. It came off of a boat and it's in a Metal cabinet named "MASE". When it was taken off the boat they cut things off of it and made a mess of things.I'm looking for a picture of this generator in it's cabinet by "MASE" so I can see what I'm missing and how it should go back together (things like switches, electrical connections, cooling etc.. I Also have a complete manual for the RDM 901. I can scan specific pages and email them to those who need them. |
R VAUGHAN
Visitor
| | Posted on Wednesday, March 04, 2009 - 10:17 am: |
|
hi i have a ruggerini rd200 air cooled can anyone tell me what hp this engine has
thanks rob |
macspud
New member
Username: macspud
Post Number: 1
Registered: 03-2009
| | Posted on Friday, March 20, 2009 - 12:01 pm: |
|
Does anyone know about ruggerini? I am looking for information on a MD 350 ruggerini. Can anyone tell me about it? |
schalk bothma
Visitor
| | Posted on Thursday, April 09, 2009 - 03:11 am: |
|
HI there
What should the oil pressure be of a 1 cylinder ruggerine RD80 be?
thanks |
humber38
Visitor
| | Posted on Tuesday, April 14, 2009 - 03:58 pm: |
|
I am looking for a service manual or a source of any information relating to a Ruggerini RM80 as fitted to a MASE 3500 marine generator set. Also a source for parts ideally within the UK. Can anybody help?. |
JimW
Visitor
| | Posted on Thursday, July 30, 2009 - 05:52 pm: |
|
Hi, I've just put an RD 901 on ebay (item no 260456077007) and found this site while looking for info on it. I've never had it running but it might be useful to somebody. |
ernvell
New member
Username: ernvell
Post Number: 1
Registered: 08-2009
| | Posted on Saturday, August 01, 2009 - 04:24 pm: |
|
HI I NEED TO BUY A TEMPERATURE SENSOR / TRANSMITTER FOR MY RUGGERINI MM 150 MARINE. CAN ANYONE HELP PLEASE ? |
Steve W
Visitor
| | Posted on Sunday, October 11, 2009 - 11:22 am: |
|
Due to lack of spares I will be replacing to perfectly good Ruggerini MM150's
They are good runners but are connected to Selva sail drives which I am retaining so no gearboxes.
Available from march 2010 with harness instrument pannel and books |
Victor Chircop
Visitor
| | Posted on Wednesday, November 11, 2009 - 10:20 am: |
|
I need a cylinder head for an RDM 901 Ruggerini marine. Anyone can help please?
victor |
ken moxon
Visitor
| | Posted on Saturday, January 23, 2010 - 08:03 am: |
|
Hi from ken moxon at sound yachts i have a rugarani engine rdm 901 in my workshop its being used as gen set, its done 40 hours but may be more as i will use it for running equipment its for sale as a complete unit if anybody wants it its a marine unit |
matt_morehouse
Member
Username: matt_morehouse
Post Number: 12
Registered: 12-2009
| | Posted on Saturday, January 23, 2010 - 10:44 am: |
|
I would be interested. Call me at 707-268-8514 or email <[email protected]> |
chirv001
New member
Username: chirv001
Post Number: 1
Registered: 12-2009
| | Posted on Sunday, January 31, 2010 - 04:12 am: |
|
Hello Ken,
Send me all the information via email
[email protected] please.
regards
victor |
paul cobb
Visitor
| | Posted on Tuesday, August 17, 2010 - 05:49 pm: |
|
anyone know where i can get rings and headset for my aircooled welder genset, i think its ruggerini, no R 0331/906973 R |
jheldatksuedu
Member
Username: jheldatksuedu
Post Number: 7
Registered: 05-2010
| | Posted on Wednesday, September 22, 2010 - 08:57 pm: |
|
I just bought a Ruggerini 2 cylinder air cooled diesel, I know nothing more about it. It looks brand new, runs great, and was priced right, that's why I bought it. I guess it's about 18 hp or so. I expect it was new 15 to 20 years ago or so.
If you know or have any info on this please send me an email [email protected] Thanks Jon
details:
TRD2 655 1 3600rpm
spec no 711024 R
R0377/802230
(eco or 300).151
Teledyne total power, memphis tn |
jheldatksuedu
Member
Username: jheldatksuedu
Post Number: 8
Registered: 05-2010
| | Posted on Wednesday, September 22, 2010 - 10:04 pm: |
|
It's 16 hp, I found it was also used by Deutz, mine was Wisconsin.
Here is a link to a pdf workshop manual, the md 151 is the same engine and the key numbers to search for.
http://boatservicehaarlem.nl/linked/ruggerini_workshop_20manual_20md150-191.pdf
Jon Held
Web site http://www.jheld.mysite.com |
christjan_est
Visitor
| | Posted on Sunday, March 13, 2011 - 12:28 pm: |
|
Please help me with Ruggerini CRDK 100. Is there any info or manual or pictures for this diesel???
anything! |
moararat54
New member
Username: moararat54
Post Number: 1
Registered: 03-2011
| | Posted on Friday, March 18, 2011 - 01:31 pm: |
|
I want parts of ruggerini marine diesel MM150
a)Electromagnetic valve to out put the motor.
b)Pump of sweet water.
Anyone knowes; |
gack
New member
Username: gack
Post Number: 1
Registered: 06-2011
| | Posted on Tuesday, June 14, 2011 - 12:13 pm: |
|
I am also looking for parts for the MM150 diesel engine, specifically the water pump.
Anyone having knowledge of where to get parts for this oldtimer nowadays ?
Thanks, Jens |
gack
New member
Username: gack
Post Number: 2
Registered: 06-2011
| | Posted on Wednesday, June 15, 2011 - 11:17 am: |
|
You can mail me also, [email protected]
Thanks, Jens |
Andrew jones
Visitor
| | Posted on Friday, July 15, 2011 - 03:12 am: |
|
Hi
Any links to ruggerini RM80 spare parts? Suppliers? I need an impellor.
Thx Andrew |
James L. Mebane
Visitor
| | Posted on Wednesday, September 14, 2011 - 05:09 pm: |
|
Need standard piston & rod for Ruggerini RD 952 |
James L. Mebane
Visitor
| | Posted on Friday, September 16, 2011 - 12:36 pm: |
|
Need standard piston & rod for Ruggerini RD 952
j,[email protected] |
Duane Henry
Visitor
| | Posted on Monday, October 24, 2011 - 06:22 pm: |
|
I have a rdm 901 diesel motor with genorator atached one complet unit.Came out of 1975 Yorktown sailboat 35 ft.needs exaust manafold.Open to all offers. please send e-mail [email protected] maybe the last complet motor,genset. |
betodisse
New member
Username: betodisse
Post Number: 1
Registered: 03-2012
| | Posted on Monday, March 12, 2012 - 09:13 am: |
|
I need specifications, Service Manual and Parts Manual of a RUGGERINI engine.
My engine number is 80120408, he was mounted in Brazil by TIET� in 1980, the model is RD950.
Is a Single cylinder, Diesel 16 Hp. air cooled. |
Volker Engelhardt
Visitor
| | Posted on Monday, April 02, 2012 - 05:20 am: |
|
Hi together,
i need the tightening torque for the cylinder head bolts of an Ruggerini RM 270.
Can anybody help me please ?
Or have anybody a repairmanual for these engine ?
Thanks
Voolga |
romat
New member
Username: romat
Post Number: 1
Registered: 05-2012
| | Posted on Saturday, May 12, 2012 - 07:27 am: |
|
Hi all
I live at Cahora Bassa in Mozambique and have recently purchased a 1981 Finnspeed 14M ex commercial fishing vessel that I am revamping for pleasure fishing. On board it has a Ruggerini generator Type RDM 901
RPM 2800
Matricola 001028
P Max Eserciz 12
P Continuat Iva 11
I need to strip and service replacing any damaged part � the fly wheel has a few chipped teeth
I would really appreciate any information regarding this Ruggerini as I live in such a remote area
Many thank and regards, Roy Matthews
Songo, Cahora Bassa,
Tete Province, Mozambique
Email: [email protected] |
colin leask
Visitor
| | Posted on Monday, August 06, 2012 - 03:50 am: |
|
hi have a ruggerini F15 diesel outboard has rocker cover missing and rocker arm missing on one cylinder motor turns over freely looking to sell if anyone interested email me [email protected] cheers ps is the f15 engine the same as a md150 generator engine thanks |
striker
New member
Username: striker
Post Number: 2
Registered: 04-2014
| | Posted on Thursday, April 24, 2014 - 05:42 am: |
|
I have a mase rm 80 gen set fitted with a ruggerini single cylinder diesel + owner manual , selling gen as seen or as parts. |
maha
New member
Username: maha
Post Number: 1
Registered: 04-2014
| | Posted on Monday, April 28, 2014 - 08:57 am: |
|
Disassemble 220v generator from RM901
Does anybody have the experience about dismount the 220V generator from the engine RM901, I can�t get the stator away from the axel and I tried everything except the right thing?:-) .
I don�t have the service manual just the parts guide and what I can see there is no sprint to remove to get it loose.
Or do anyone have one for sale? |
donmitch
Visitor
| | Posted on Wednesday, June 11, 2014 - 05:55 pm: |
|
I have a mid to late 80's sea water cooled, 4 KW Mariner gen-set Model MG4D, with a Mase alternator coupled to a Ruggerini engine. The name plate on the engine reads "engine #R1.81". Does this number indicate to anyone the model of the engine?
Am looking for parts to rebuild the engine. Where can I find them? Any suggestions are welcome
Thanks |
Christian turcotte
Visitor
| | Posted on Friday, July 04, 2014 - 06:11 pm: |
|
I need valve clearance for ruggurini rm81 motor 42040
Many thanks |
msing699
New member
Username: msing699
Post Number: 1
Registered: 07-2014
| | Posted on Tuesday, July 22, 2014 - 09:02 am: |
|
Looking for a complete wiring harness with the key box for a RD 270 motor |
alpitcairn
New member
Username: alpitcairn
Post Number: 1
Registered: 04-2015
| | Posted on Saturday, April 11, 2015 - 10:41 am: |
|
Ruggerini RDM 901 Marine diesel generator.
I need a new Rotor for this Generator, does anyone know where I can source ? Any other spare parts I would also be interested in .
Thanks |
Bill wyman
Visitor
| | Posted on Sunday, September 27, 2015 - 02:10 pm: |
|
I am looking for a top end rebuild kit and one pushrod for a rd 952 ruggerini.thanks,Bill |
alpitcairn
New member
Username: alpitcairn
Post Number: 2
Registered: 04-2015
| | Posted on Monday, September 28, 2015 - 11:02 am: |
|
Ruggerini RDM 901 Marine diesel generator.
I wanted a new Rotor but have not found one , so decided to replace the generator with another new genset.
That means I have the whole RDM 901 to sell, which as a diesel engine runs fine. there was never anything wrong with the diesel side of the generator. I will sell as a whole or broken down for parts, piston, head, block etc, The bits need cleaning up but otherwise are sound. If interested email me and I will send photos of what there is. No idea of pricing, I just want to get rid as its taking up space. |
jan Daugaard
Visitor
| | Posted on Wednesday, October 28, 2015 - 12:07 pm: |
|
Hi i want. An exhaust manifold to a RDM 910 marinegenerator. Best Regards Jan |
Irish
Visitor
| | Posted on Thursday, September 22, 2016 - 07:45 pm: |
|
Hi
I am looking for part number 132 for a ruggerini F15 .The part number is from the original spare parts catalog .
Hope someone can help |
pete_darlow
New member
Username: pete_darlow
Post Number: 1
Registered: 01-2017
| | Posted on Monday, January 30, 2017 - 03:53 pm: |
|
Hi,I'm looking for a bellhousing for a Ruggerini mm150, any leads appreciated. |
ricky1
New member
Username: ricky1
Post Number: 1
Registered: 01-2018
| | Posted on Wednesday, January 17, 2018 - 07:29 am: |
|
Ihave purchased a
RD92/2 Ruggerini motor generator. I have no specifications for this machine. I do not know what fuel this motor uses as I have checked on the tank and it smells like paraffin. Can you help with the type of fuel this motor uses and the size of the battery. |
Geoff Hayton
Visitor
| | Posted on Sunday, April 22, 2018 - 05:14 am: |
|
Ruggerini RM 80 Cooling Circuit- Does anyone know if the raw water inlet to the exhaust is a union with a very small hole, c 2mm in diameter. Looks much smaller than I am used to seeing on other makes? |
leandro juarez
Visitor
| | Posted on Saturday, June 09, 2018 - 06:19 pm: |
|
I own a Ruggerini RM 90. and need to find piece listing sketch, and a suplier for spare parts. If anyone can help with this e-mail me at [email protected] |
leandro juarez
Visitor
| | Posted on Saturday, June 09, 2018 - 06:23 pm: |
|
Hi. I need spare parts listing and wiring map of Ruggerini RM 90. Please e-mail me at [email protected] if you have any information about this motor. It would be a big help! |
kokostar
New member
Username: kokostar
Post Number: 1
Registered: 07-2021
| | Posted on Monday, July 05, 2021 - 03:42 pm: |
|
Hello I own Ruggerini MM150 and needs a spare part which is attached to the convertor, where the wather go out. The numbers in my catalog are:
510-64
450-35
992-17 x2 |
kokostar
New member
Username: kokostar
Post Number: 2
Registered: 07-2021
| | Posted on Monday, July 12, 2021 - 03:40 pm: |
|
Hello, I ma looking for ruggerini mm 191 exhaust mixing elbow, Help please! |
davidzet
New member
Username: davidzet
Post Number: 1
Registered: 11-2021
| | Posted on Wednesday, November 17, 2021 - 12:00 pm: |
|
Hi all - I have a Ruggerini MM150 in my sailboat. It's at least 25 years old, and (it seems) not easy to find parts. So I am looking for (1) a diesel of the same size that I can swap in OR another MM150 that's in decent condition.
I'm in The Netherlands (Amsterdam) |
88chromium123
New member
Username: 88chromium123
Post Number: 1
Registered: 01-2022
| | Posted on Monday, January 10, 2022 - 02:32 pm: |
|
Hi
I am looking for Water and Exhuast gas mixer collector.
(Exhaust Manifold) Part Number 215-09
For RDM901 |
