| Author |
Message |
    
Ted Dysart
Member
Username: 61sabre
Post Number: 5
Registered: 02-2015
| | Posted on Thursday, August 04, 2016 - 09:32 am: | 
|
1959 Graymarine V-8 250, 135 hp. Disassembled down to a short block. I'll sell as a complete unit with Velvet Drive transmission or as individual parts. Includes factory Jabsco pump, mechanical fuel pump, Delco generator, starter, rebuilt Carter side draft carb and second identical carb which needs rebuilding. Exhaust manifolds in excellent condition, as are matching elbows. They are early Graymarine 3-bolt style. Mechanical fuel pump. Factory aluminum intakes have been bead blasted and look great. Valve covers, heads and cams show minimal wear. Autolite distributor with nice cap and wires. Also have various Century bronze hull hardware. Email me to make offers or for photos. |
Ted Dysart
Member
Username: 61sabre
Post Number: 6
Registered: 02-2015
| | Posted on Friday, August 05, 2016 - 02:12 pm: |
|
Here are some photos of the engine. I will post a photo of the manifolds soon.
 |
Ted Dysart
Member
Username: 61sabre
Post Number: 7
Registered: 02-2015
| | Posted on Wednesday, August 10, 2016 - 11:09 am: |
|
Here are some photos of the original 3-bolt manifolds for the Graymarine V-8 135. These will fit the heads of all 250 c.i. and 327 c.i. Graymarine V-8 engines.
 |
Ted Dysart
Member
Username: 61sabre
Post Number: 8
Registered: 02-2015
| | Posted on Tuesday, September 27, 2016 - 10:22 am: |
|
The manifolds have been sold. The rest of the engine is still available. |
Rick Dolan
Visitor
| | Posted on Saturday, January 07, 2017 - 06:27 pm: |
|
Ted, Any chance you might still have the fuel pump? AC 4478. Thanks |
jim k
Visitor
| | Posted on Saturday, January 07, 2017 - 11:41 pm: |
|
looking for motor mounts.not sure how this forum works |
Ted Dysart
Member
Username: 61sabre
Post Number: 9
Registered: 02-2015
| | Posted on Sunday, January 08, 2017 - 09:54 pm: |
|
Rick,
I still have the fuel pump. It's the 4478, and is a complete unit with the glass bowl, and even still has a gasket attached. This one has been sitting for years and may need a rebuild kit, which are available online. |
Ted Dysart
Member
Username: 61sabre
Post Number: 10
Registered: 02-2015
| | Posted on Sunday, January 08, 2017 - 09:56 pm: |
|
Jim, I need to leave the motor mounts attached to the block and transmission, since they are screwed into the original stringers. I would not be able to ship the engine as easily without them. |
jim k
Visitor
| | Posted on Tuesday, January 10, 2017 - 11:02 pm: |
|
no problem. thanks for the reply. |
Rick Dolan
Visitor
| | Posted on Monday, January 16, 2017 - 05:36 pm: |
|
Ted, I am interested. How much do you want for the pump? Is $50 a reasonable offer? Thanks Rick |
Ted Dysart
Member
Username: 61sabre
Post Number: 11
Registered: 02-2015
| | Posted on Monday, January 16, 2017 - 09:18 pm: |
|
Rick, that's an acceptable offer. Give me your address and I'll add shipping. I get wholesale FedEx pricing at work, so it won't be much.
 |
Rick Dolan
Visitor
| | Posted on Tuesday, January 17, 2017 - 10:39 am: |
|
Ted, Done deal! 4 Acorn Lane Methuen, MA 01844. I have your information from the Century Boat Club site. Thanks Rick |
Ted Dysart
Member
Username: 61sabre
Post Number: 12
Registered: 02-2015
| | Posted on Tuesday, January 17, 2017 - 05:01 pm: |
|
Rick, can you email me at [email protected]. I have your total cost with shipping. The pump will ship tomorrow via FedEx ground. I give you the tracking number as well. |
jim k
Visitor
| | Posted on Saturday, January 21, 2017 - 09:00 pm: |
|
how much would you want for the carbs} |
Ted Dysart
Member
Username: 61sabre
Post Number: 13
Registered: 02-2015
| | Posted on Sunday, January 22, 2017 - 09:11 pm: |
|
I'm asking $100 for the rebuilt one and $45 for the one that needs the rebuild kit. The intake manifolds are in excellent shape and are going for $100 for the pair. |
Eric Peggs
Member
Username: epeggs
Post Number: 26
Registered: 02-2017
| | Posted on Wednesday, May 10, 2017 - 01:11 pm: |
|
Im interested in the heat exchanger/oil cooler. Is it still available? |
Ted Dysart
Member
Username: 61sabre
Post Number: 14
Registered: 02-2015
| | Posted on Wednesday, May 10, 2017 - 04:50 pm: |
|
Still have it. $80.00 + shipping. Send me your address and I'll get an estimate. I prefer PayPal for payment. My email is [email protected]. |
Eric Peggs
Member
Username: epeggs
Post Number: 27
Registered: 02-2017
| | Posted on Wednesday, May 17, 2017 - 11:21 am: |
|
I will keep you posted. Trying to repair the one that i have. If that fails, I will be in touch! Thank you for the fast response. |
Ted Dysart
Member
Username: 61sabre
Post Number: 15
Registered: 02-2015
| | Posted on Monday, May 22, 2017 - 08:44 am: |
|
Jim K - I have decided to scrap the block. I removed the engine and transmission mounts. I'm asking $30 each, or $120 for the set. Carbs are still for sale. Make me an offer on anything you are interested in, I'm flexible. |
Rob
Member
Username: rdurrant
Post Number: 9
Registered: 08-2020
| | Posted on Monday, November 06, 2023 - 08:31 pm: |
|
Any parts left? |
