|
| Starter/Generator Schematic |
| Author |
Message |
    
Howard Argales Sinclair Jr.
Member
Username: vahowdy
Post Number: 7
Registered: 01-2015
| | Posted on Sunday, July 19, 2015 - 11:04 am: | 
|
This is the electrial drawing for my PW_27 in my boat. I hope this could be of help to some of you. It would work for any Delco Starter/Generator system with a magneto. |
David Grosse
Advanced Member
Username: davidg
Post Number: 41
Registered: 11-2010
| | Posted on Wednesday, July 22, 2015 - 08:07 pm: |
|
Howard,
Thanks for posting the diagram. It may help me with my Atomic 2 project. That engine came to me without any wiring, but has a magneto and a starter/generator.
Regards,
David Grosse
David's Yacht Service
SoCal |
Howard Argales Sinclair Jr.
Member
Username: vahowdy
Post Number: 8
Registered: 01-2015
| | Posted on Thursday, July 23, 2015 - 08:32 pm: |
|
Hi David, I see, I did not show the voltage regulator case grounded. |
Norman Narmore
Member
Username: normann
Post Number: 10
Registered: 01-2016
| | Posted on Sunday, September 18, 2016 - 09:59 am: |
|
Howard, Thanks for sharing this drawing, I love it! I'm in the process of getting my PW-27 running and tested before it goes into the boat. It never occurred to me to use an ignition switch as a ground. A simple solution if there is no problem with everything half way hot all the time. Sorta similar to a positive ground system I guess.
Can you or anyone else give me the Voltage Regulator Model Number for the correct Delco/Remy starter/generator used on the PW-27? I looked in the archives but could not pin it down. Thanks! |
|
|
|
|
