| Author |
Message |
    
charlie13
New member
Username: charlie13
Post Number: 1
Registered: 06-2015
| | Posted on Monday, June 22, 2015 - 01:07 am: | 
|
Hi I'm new to this forum. I am rebuilding a 1963 Yanmar NTS70R. It was seized with piston rings stuck. I unseized it after alot of effort with a sledge hammer and bits of wood. The rebuild is going well but I'm having trouble removing the sleeve. It is a Dry sleeve? comes out towards the head?. Anyone removed one or from a similar engine?. Any tips advice would be great. |
kipster
Member
Username: kipster
Post Number: 19
Registered: 05-2010
| | Posted on Saturday, July 11, 2015 - 01:08 am: |
|
Sorry for the late response.
However I found some info that might be useful
Regards
kip |
kipster
Member
Username: kipster
Post Number: 20
Registered: 05-2010
| | Posted on Saturday, July 11, 2015 - 01:16 am: |
|
oops. No attachments.
Try this
 |
kipster
Member
Username: kipster
Post Number: 21
Registered: 05-2010
| | Posted on Saturday, July 11, 2015 - 01:17 am: |
|
and this
 |
