| Author |
Message |
    
larry linden
New member
Username: lcor28
Post Number: 2
Registered: 05-2014
| | Posted on Monday, May 12, 2014 - 04:39 pm: | 
|
Hello I need an intake/exhaust manifold for a Palmer p60 . The engine has been rebuilt but the manifold is cracked badly. I tried to jb weld it ,but no luck can anyone please help me. |
Eddie Ross
Senior Member
Username: eddie
Post Number: 320
Registered: 04-2003
| | Posted on Tuesday, May 13, 2014 - 12:47 pm: |
|
Take it to a good weld shop and see what they can do with it. |
larry linden
New member
Username: lcor28
Post Number: 3
Registered: 05-2014
| | Posted on Tuesday, May 13, 2014 - 10:13 pm: |
|
welding was the first thing i tried . did'nt heat and cool the cast correctly ,fixed one crack but made another .so i ground on the crack and gooberd it up .put it back on and it's now leaking from the bolt holes and out of the edge of the gooberd area which means internal cracks but the engine ran good at least.so i still need a manifold. |
Eddie Ross
Senior Member
Username: eddie
Post Number: 321
Registered: 04-2003
| | Posted on Wednesday, May 14, 2014 - 02:58 am: |
|
The only other thing is to locate one off a scrapped engine. There are no new or after market ones. The original manifold molds were scrapped. |
larry linden
Member
Username: lcor28
Post Number: 4
Registered: 05-2014
| | Posted on Wednesday, May 14, 2014 - 06:33 pm: |
|
That's why I came here Ed .I'm hoping someone will have one that they will sell to me or maybe trade for something . |
Eddie Ross
Senior Member
Username: eddie
Post Number: 322
Registered: 04-2003
| | Posted on Thursday, May 15, 2014 - 12:12 am: |
|
This is the place to look. Hope you find it. |
Kevin Wikar
New member
Username: capt_wik
Post Number: 2
Registered: 05-2014
| | Posted on Thursday, May 15, 2014 - 04:56 pm: |
|
I've got an entire engine for sale.
Cap't Wik |
