| Author |
Message |
    
Terence Eakin
| | Posted on Sunday, February 09, 2003 - 01:34 pm: | 
|
Anybody got any information about the "WICO 01" magneto? Its on a Caille or American engine (not sure what one it is). Any info would be appreciated. |
Knut Hauge
Visitor
| | Posted on Sunday, December 26, 2004 - 04:41 pm: |
|
Hello there.Your Wico is probably a brittish made mag.Also similar to the Wipac mag serial one as far as I can see.Black cap with four screws to protect the ht coil,am I right?
Very good magneto,parts are still aviable.
Knut... |
Cody Turner
New member
Username: redneck76
Post Number: 1
Registered: 03-2013
| | Posted on Sunday, March 17, 2013 - 03:37 pm: |
|
Anyone have a "WICO 01" magneto for sale? looking for one. |
Kenneth Marks
New member
Username: kenny
Post Number: 1
Registered: 03-2013
| | Posted on Sunday, March 17, 2013 - 05:47 pm: |
|
is this for a 1 cylinder. |
Scott Noseworthy
Senior Member
Username: scott_n
Post Number: 222
Registered: 02-2008
| | Posted on Monday, March 18, 2013 - 01:34 pm: |
|
I have two of them one on my caille and one spare they are rare and hard to find it was one of the first magneto that WICO made. Go to caille and look at the thread my winter project for a picture. |
Cody Turner
New member
Username: redneck76
Post Number: 2
Registered: 03-2013
| | Posted on Wednesday, March 20, 2013 - 09:23 pm: |
|
Kenneth- Yes it is for a one cylinder. How much are you asking,if willing to sale?
Scott- Are you interested in saleing it? How Much? |
Scott Noseworthy
Senior Member
Username: scott_n
Post Number: 224
Registered: 02-2008
| | Posted on Thursday, March 28, 2013 - 08:34 am: |
|
Cody sorry not at this time the one on my engine works and the one the bench has some missing parts I need like the nickel vent and all the right bolts |
Cody Turner
New member
Username: redneck76
Post Number: 3
Registered: 03-2013
| | Posted on Wednesday, April 03, 2013 - 09:29 pm: |
|
I dont need the whole partjust the outside cover/cap. |
Tatu Ker�nen
New member
Username: tatu
Post Number: 1
Registered: 05-2013
| | Posted on Thursday, May 02, 2013 - 07:27 pm: |
|
I have this Wico for sale, in Finland.
https://lh6.googleusercontent.com/-q_bfvisAflw/UYLzwEXyajI/AAAAAAAABiA/uDgZYnDJu pg/w480-h640/Kipin%25C3%25A4%25C3%25A4+009.jpg
https://lh4.googleusercontent.com/-4_zvRjry4CA/UYLzoycvr7I/AAAAAAAABhw/raYxvvKp1 BM/w640-h480/Kipin%25C3%25A4%25C3%25A4+003.jpg
https://lh5.googleusercontent.com/-iy6OHEXET-A/UYLzsNz1XyI/AAAAAAAABh4/t-ctvG6E3 8I/w480-h640/Kipin%25C3%25A4%25C3%25A4+005.jpg |
Scott Noseworthy
Senior Member
Username: scott_n
Post Number: 232
Registered: 02-2008
| | Posted on Wednesday, January 22, 2014 - 10:33 am: |
|
Cody sorry I have not replied to your post I have bin working on the Morgun project and it is taking all my time Tatu mag is the same but the tripping arm is shorter |
Craig Richards
Member
Username: saltycraig
Post Number: 10
Registered: 06-2018
| | Posted on Monday, April 13, 2020 - 09:27 pm: |
|
Hi, I have a WICO model A with impulse starter.
I would like to know if when timing them, do you time it to the impulse starter or the actual running speed timing?
I have it in a Simplex single cylinder.. |
Ernie
Senior Member
Username: ernie
Post Number: 2578
Registered: 01-2002
| | Posted on Tuesday, April 14, 2020 - 06:12 am: |
|
For years I have set the timing so the impulse trips just at TDC or slightly before.
Hope this helps
Ernie |
