|
| Author |
Message |
    
ivor
Member
Username: ivor
Post Number: 5
Registered: 07-2012
| | Posted on Thursday, November 22, 2012 - 01:50 pm: | 
|
I need a 7/8 inch stern half coupling for my K1. Have tried eBay, other web sites and sources with no success.
If anyone can help or suggest something, would be most grateful.
Ivor. |
jb_castagnos
Senior Member
Username: jb_castagnos
Post Number: 737
Registered: 07-2002
| | Posted on Thursday, November 22, 2012 - 11:55 pm: |
|
I have some blank ones that I have cast along with the eccentric couplings for the Lockwood Ash motors, I believe they are about 3 1/2" on the od, could be machined down. If interested I can get measurements and pictures. |
ivor
Member
Username: ivor
Post Number: 6
Registered: 07-2012
| | Posted on Saturday, November 24, 2012 - 03:29 pm: |
|
Hello JB.
Many thanks for this info. Will check measurements and get back to you.
Had several very helpful posts from Dick as well as photos of some beautiful engines and boat trips.
Sorry for delay but look forward to talking some more.
Ivor. |
|
|
|
|
