|
| Author |
Message |
    
Steve Roskowski
Member
Username: modhydro
Post Number: 17
Registered: 08-2004
| | Posted on Friday, August 26, 2011 - 12:50 pm: | 
|
I need to find one or better yet two three cylinder mags for two Pierce Budds that I am going to restore. One is actually a dual ignition which I guess will be even harder to come by. Please let me know of any leads on them.
Thanks
Steve Roskowski
317 650-1087 |
Bruce Wendling
New member
Username: bruno
Post Number: 2
Registered: 12-2006
| | Posted on Tuesday, February 28, 2012 - 06:04 pm: |
|
Always a good job right here. Keep rolling on trouhgh. |
Lew Dobbins
Senior Member
Username: ldobbins
Post Number: 74
Registered: 12-2002
| | Posted on Wednesday, February 29, 2012 - 12:35 pm: |
|
Greetings,
Are they Dual ignition or Dual Spark (2 plugs per cylinder)?
3 cyl mags are not easy to come by but 6 cylinder are. Just need to verify how many degrees each cylinder fires from one another. And Dual spark and/or Dual ignition 6 cyl mags are available. higher price but still out there.
Cheers,
Lew |
Steve Roskowski
Member
Username: modhydro
Post Number: 18
Registered: 08-2004
| | Posted on Wednesday, February 29, 2012 - 03:55 pm: |
|
Lew,
This is a three cylinder two stroke firing every 120 degrees of crank rotation. Unfortunately it is also dual spark. I know it may be near impossible, but on the flip side if a guy had one, who else would need it?
Sometimes things can just be too obscure to be of any use except to one or two guys.
Thanks again.
Steve |
|
|
|
|
