|
| Sea water inlet elbow on exhuast IH 345 |
| Author |
Message |
    
Gabriel White
New member
Username: gadwhite
Post Number: 1
Registered: 02-2010
| | Posted on Tuesday, February 23, 2010 - 08:15 pm: | 
|
Does anyone know if the Sea water inlet elbow on the exhaust manifold of a IH 345 can be replaced with a IH 392/304 part? Also does anyone have a source for a IH 345 exhaust elbow. |
Gabriel White
New member
Username: gadwhite
Post Number: 2
Registered: 02-2010
| | Posted on Monday, March 01, 2010 - 06:50 pm: |
|
Anyone? |
brian mcguire
New member
Username: bmacguyver
Post Number: 1
Registered: 09-2010
| | Posted on Sunday, September 26, 2010 - 10:56 pm: |
|
all IH SV series engines share the same exhaust mounting, gaskets, and manifolds per application.
hth
mac |
scott downey
Visitor
| | Posted on Thursday, September 30, 2010 - 08:55 am: |
|
Barr 20-0000
I have the barr 20-0000 on my Palmer IH 392
this PDF shows the picture |
scott downey
Visitor
| | Posted on Thursday, September 30, 2010 - 09:10 am: |
|
10 years ago I adapted my barr riser to fresh water cooling
I brazed a bronze pipe nipple to the outlet, drilled an angled hole and put a discharge pipe into this added on outlet.
I sealed the cast in discharge in the barr, and brazed a 3/4 fitting to the top of the riser to attach a fresh water line.
So now the riser is part of the coolant circuit for the engine. |
|
|
|
|
