| Author |
Message |
    
ken guest
New member
Username: kennyg
Post Number: 1
Registered: 01-2007
| | Posted on Wednesday, February 21, 2007 - 07:29 pm: | 
|
i am refurbishing a Kermath sea twin and now have 3different shades of paint .does anyone know what color is correct for a sea twin |
Frank Petran
Senior Member
Username: frank_petran
Post Number: 94
Registered: 05-2009
| | Posted on Friday, March 26, 2010 - 06:26 pm: |
|
Just unloaded my Kermath Sea Twin serial no 81055.
Engine has a transmission bolted on. As several things will be needing attention I am looking for as much info as possible. Also a source for parts because I will be needing a few. I will probably need a head gasket but a whole overhaul set would be great. The carburator, fuel pump will need gaskets and seals also. I haven't pulled the front plate on the water pump but as things normally go will need a impeller. This engne has a rope start plate on the front of the flywheel and a v belt pulley nearist the engine for a starter/generator or something else. Does anyone have a manual that I can beg, borrow or steal but more likely have a copy made of? Any info will be greatly appreciated. Thanks, Frank |
Frank Petran
Senior Member
Username: frank_petran
Post Number: 97
Registered: 05-2009
| | Posted on Tuesday, March 30, 2010 - 05:46 pm: |
|
Looking for a source of parts for the Sea Twin. Can I use any pasrts from an Atomic 2? If so does anyone have a source for those. Thanks Frank |
Frank Petran
Senior Member
Username: frank_petran
Post Number: 103
Registered: 05-2009
| | Posted on Saturday, April 24, 2010 - 10:54 pm: |
|
And I thought restoring wood boats was hard getting hardware but old marine engines make wood boat restoration child's play. Further dismantling of this engine leads to one discovery after another. I am now in need of a manifold. Someone welded the crack on top but didn't look for another one. I would like to replace the manifold if there is one to be had. Any out there! I don't know if the Atomic 2 uses the same manifold if so and one is available I would use that. Also looking for a source for the Jabsco impeller. It shows some ware and I would like to have a spare. |
Frank Petran
Senior Member
Username: frank_petran
Post Number: 104
Registered: 05-2009
| | Posted on Tuesday, April 27, 2010 - 07:41 pm: |
|
FYI. PumpAgents have the proper impeller for that Jabsco pump on the Kermath and Atomic engines. Pumpagents.com |
