| Author |
Message |
    
Maarten Hooykaas
| | Posted on Friday, August 29, 2003 - 12:36 am: | 
|
I am the proud owner of a Yanmar NTS85 believed to be 40-50 years old. She is in near perfect condition and I am just about to put her into an 1940's Athol Burns Design Clinker.
I have no information whatsoever on this engine and would be grateful if anybody can tell me more about it. |
paulvec
Member
Username: paulvec
Post Number: 5
Registered: 02-2007
| | Posted on Monday, November 05, 2007 - 06:02 am: |
|
old message! did you get the NTS successfully installed in your Athol Burns? must be a NZer! Have a handbook! cheers paul |
Mervyn Dyke
Visitor
| | Posted on Tuesday, March 09, 2010 - 01:09 am: |
|
Hi gents, have just purchased a NTS85 my self in a clinker,owner told me it had reverse but will only go forward but previous owner swears it has reverse.Looks like a centrifigal drive after the motor. Can anybody help me with a manual or imformation.
thanks |
hookedup
New member
Username: hookedup
Post Number: 1
Registered: 02-2010
| | Posted on Tuesday, March 09, 2010 - 04:02 pm: |
|
Hi Mervvyn,
Yes the NTS85, does have reverse.
You may just need to do some adjustment.
I know here in Aus, the reverse band is about the only part of this engine which cannot be sourced as a replacement part.
Great engine, except for low rev vibration, but that is common to all the single cylinder engines of the time I think.
Paul. |
gogogadgit
New member
Username: gogogadgit
Post Number: 3
Registered: 03-2007
| | Posted on Tuesday, March 09, 2010 - 07:26 pm: |
|
Good morning
I have an ole clinker with one of these motors, i have not been able to obtain a manual is there such and can someone share a copy.
Bruce |
hookedup
New member
Username: hookedup
Post Number: 2
Registered: 02-2010
| | Posted on Tuesday, March 09, 2010 - 10:07 pm: |
|
I have a photo copy of the work shop manual and the original owners manual.
I bought both of these from.
MINARDS
Yanmar Diesel Specialists.
P.O. Box 304.
Toronto.
N.S.W.
Aus.
2283.
http://www.yanmarspareparts.com/
Hope this helps. The people I dealt with were very good. Postage to U.S.A. should not be too bad.
Paul. |
