| Author |
Message |
    
Thomas E.Trowbridge Sr.
| | Posted on Saturday, February 09, 2002 - 01:09 pm: | 
|
Looking for information on Chrysler Outboard Corp. 4cyl 32 cu.oh/v engine,serial # J 068737.
Military Model 4A032.II.This engine is being used on a 3kw,1 & 3 Phase Onan generator.I would like to add a starter if possable.
thanks,
Tom Trowbridge Sr. |
Don Dreher
| | Posted on Thursday, April 15, 2004 - 05:46 pm: |
|
I have a Chrysler 105hp Charger with the model number 1055HB. I need to know what year and if there is a special meaning to "Charger"
Don |
andrew
| | Posted on Sunday, April 18, 2004 - 06:54 pm: |
|
Don,
1055HP is a 105HP, model year 1976.
We have a listing of model numbers on the MarineEngine.com site at the following link: Chrysler Outboard ...although for some reason it doesn't show model 1055HB...
I don't know what defined the the Charger models.
Regards,
Andrew |
Jerry Meier
Visitor
| | Posted on Tuesday, July 13, 2004 - 03:21 pm: |
|
I have a 4hp Chrysler outboard Model#42H8D-serial #11243,that I have not used in years and have lost owners manual. What is the ratio of 2 cycle oil to gas for this motor?
Thanks,
Jerry |
andrew
Moderator
Username: andrew
Post Number: 807
Registered: 11-2001
| | Posted on Tuesday, July 13, 2004 - 06:37 pm: |
|
That's a 1978 motor.
I just checked the service manual... and it doesn't say, but I believe the gas to oil should be 50:1 for that motor.
You can get more outboard help on the discussion board at MarineEngine.com. |
Jerry Meier
Visitor
| | Posted on Wednesday, July 14, 2004 - 07:25 pm: |
|
Thanks Andrew!! |
DEFCONIV
Visitor
| | Posted on Tuesday, November 16, 2004 - 09:00 pm: |
|
Here is a link to a military site that contains a PDF file on the 4A032 and 2A016 engines. Maybe this will help.
http://www.clcc.org/images/TM_9-2805-257-14.pdf |
Kendall
Visitor
| | Posted on Thursday, February 24, 2005 - 03:16 pm: |
|
I have a 2 cylinder air cooled 16 cu. in. 4 cycle engine manufactured by Chrysler Outboard Corp. Mfg date is 04-73 the military TM # is TM-5-2805-257-14 & 24P. The Stock # was FSN-2805-072-4871. I would like to rebuild this motor and would like to find all the technical information, torque, Hp, RPm that may be available. Also would like any information such as cutaway of assembly with discription. If anyone knows where I can find this type of information, or how I might find it I would appreciate the Help.
Thank You. Kendall Gosvener
[email protected] |
Kendall
Visitor
| | Posted on Thursday, February 24, 2005 - 03:31 pm: |
|
To DEFCONIV
From KENDALL
Thank You, Your help is so much appreciated.
I hope that you recognize how much your help really means. |
Will Campbell
Visitor
| | Posted on Friday, August 05, 2005 - 12:29 pm: |
|
For manuals on these engines you might try
http://www.boyceequipment.com/1533_2milmanuals.html
or phone them at 1-800-748-4269
as they seem to have the manuals on all of these. |
DASRoofing
Visitor
| | Posted on Saturday, August 27, 2005 - 03:39 pm: |
|
I bought some stuff from Goverment Liquidation and a Giant Air Compressor was in the lot. Well I do not want the darn thing and am wanting to sell it. I do bot know if it runs or works nor do I care. I just do not want it. Will sell for $500 buyer to pickup from my office. The motor is a Chrysler 4cyl 32 cu.oh/v engine,serial # J090543 Model #SFL05-0003Date MFD 9/75 Mil Model #4A032-II Stock #NSN-2805-00-068-7512. There is another number but the plate is chipped so I have no clue what it is for but the number is DAAK01-74-C-5515. If noone wants to buy this, then I need a repair manual for it to make it run if it does not run. |
solarrog
Senior Member
Username: solarrog
Post Number: 167
Registered: 03-2002
| | Posted on Saturday, August 27, 2005 - 03:55 pm: |
|
I tried too read your mind, but received a busy signal. What city and state are you in?
Roger
California |
DASRoofing
Visitor
| | Posted on Saturday, August 27, 2005 - 04:31 pm: |
|
I am in Center, Texas. Sorry I left that out.
Dave |
Leigh Onyxis
Visitor
| | Posted on Tuesday, April 04, 2006 - 06:22 am: |
|
I have a two cylinder 5hp chrysler out board and it is a beauty, but i have just snapped the fuel float and it is now kaput, is there a way i can repair it apart from replacing the, part because i can not find one anywhere.
(ps is there a more correct name for a fuel float)
RATONYX |
Kathy Clevenger
Visitor
| | Posted on Thursday, April 06, 2006 - 09:28 am: |
|
I have a Chrysler 12.9 boat motor - 1973, it belonged to my dad who is deceased. Does anyone have any idea how much it should be worth and if you can get parts for them now? Any help would be appreciated.
Thanks
Kathy |
andrew
Moderator
Username: andrew
Post Number: 623
Registered: 11-2001
| | Posted on Thursday, April 06, 2006 - 09:32 am: |
|
Kathy,
It isn't worth much. You should use it if you can. There is a NADA price guide here.
You can get parts here or from a Mercury Marine dealer. |
lee lewis
Visitor
| | Posted on Friday, May 05, 2006 - 09:14 pm: |
|
Hello I have a chrysler 3.5 1969 model 301 and I realy need some parts that are off the wall , like the pull rope houseing and all the guts , and a carb kit if it exists plus I have a small prob the engine has compression and spark and fuel but absoluly refuses to fire what amount of compression should I have ? the engine was locked up when I got it ? |
bluelionmac
Visitor
| | Posted on Saturday, May 13, 2006 - 05:16 am: |
|
i have a 12.9 crysler i think it may be a 1973, it has a light under the top of cover and also is electric keystart. it has a short shaft. maybe one of us could sell for parts. because its not doing anygood if it wont run properly. do you have a picture of it. thanks e-mail me |
andrew
Moderator
Username: andrew
Post Number: 654
Registered: 11-2001
| | Posted on Saturday, May 13, 2006 - 03:08 pm: |
|
Lee,
Rope start parts would probably have to be bought from a Mercury dealer. We sell carb kits for chrysler outboards on the marineengine.com site. |
hoover
Visitor
| | Posted on Saturday, May 13, 2006 - 03:31 pm: |
|
i have a chrysler 12.9 it idles fine while in gear.but when you increase the throttle while in gear it act as if it is jumping out of gear |
andrew
Moderator
Username: andrew
Post Number: 655
Registered: 11-2001
| | Posted on Saturday, May 13, 2006 - 07:55 pm: |
|
Hoover,
You should post that question in the Chrysler/Force catagory of the discussion board at MarineEngine.com.
This site, OldMarineEngine.com is for old "inboards", not outboards. |
David Zabel
Visitor
| | Posted on Tuesday, July 04, 2006 - 07:42 pm: |
|
I have a 1970 Chrysler 5hp model 52ha and I have not used it for about 20 years. I believe the fuel/oil mix is 50:1, But I don't want to make a big mistake. Can anyone verify for me that this is correct? |
Suzie McD
Visitor
| | Posted on Wednesday, July 05, 2006 - 02:20 am: |
|
I just purchased a Chrysler 5HP model# 54HD 9533...Thiss puppy purrs like a kitten in idle but when you put it into FAST it stalls out. The motor has moved up to an higher altitude, does it need an idle adjustment or is there jets that need to be replaced? Thanks Suzie |
foxman
Visitor
| | Posted on Wednesday, July 05, 2006 - 09:21 pm: |
|
Try replacing the fuel filter and see what that does for the cause. Unless you're using this engine on Lake Titicaca in Peru 15,000 feet above sea level I don't think altitude would hurt a little motor like this. How high up are you?
Try the filter first. |
flyfishing
New member
Username: flyfishing
Post Number: 1
Registered: 08-2006
| | Posted on Sunday, August 13, 2006 - 07:38 am: |
|
I have a CHYSLER 4hp model # 42H8D 1978 outboard does anyone know where I can get a replacement prop? |
[email protected]
Visitor
| | Posted on Friday, September 01, 2006 - 09:00 pm: |
|
I have a chrsler 32 cu in engine mil.model # 4A032 and was trying to find some info on it to see if it would work for my app. I would like to know the h.p. and was there a common governed r.p.m.? also is there parts available or not thanks a million Rob |
Jerry Finney
Visitor
| | Posted on Sunday, June 03, 2007 - 04:44 pm: |
|
i need a stater for a chyster 4 chy engine jo9460s thanhs |
Davin Carson
Visitor
| | Posted on Monday, June 25, 2007 - 03:59 pm: |
|
i have a small, Chrysler Outboard corp. engine with a serial # 4264, and engine # 58021. can anybody tell me the year of this engine? |
captain
New member
Username: captain
Post Number: 1
Registered: 07-2007
| | Posted on Saturday, July 07, 2007 - 01:53 am: |
|
hi i have a 1976 chrysler outboard engine 4 hp model # 42hb serial # 2041 and i need a complete carburator. can any one tell me where i can find one. |
hunkoffudge
Visitor
| | Posted on Tuesday, August 14, 2007 - 12:18 pm: |
|
Hi i have recently purchased a 1971 chrysler 6hp
model 62BA. The manual start is not working. The small gear which is suspose to rise and engage the flywheel is made of plastic and is broken. The engine works fine just wondering if there is any possible way to track down a new one. |
redmark1306
Visitor
| | Posted on Thursday, November 29, 2007 - 05:53 am: |
|
Hi I just purchased a 1976 5hp Chrysler outboard(Model 54HD) and was wondering if anyone new of a site to download the PDF of the manuals for it, or if anyone has them if they would be kind enough to email them to me at [email protected] |
orsimchick
Visitor
| | Posted on Wednesday, January 02, 2008 - 05:44 am: |
|
Hi ijust bought this boat and no nothing about the motor or boats lol, can you tell me what fuel it will run on and mixture if it is 2stroke
Cheers |
andrew
Moderator
Username: andrew
Post Number: 908
Registered: 11-2001
| | Posted on Wednesday, January 02, 2008 - 09:45 am: |
|
orsimchick,
You haven't given us any information on the motor... but if it's a Chrysler outboard, it's a 2 Stroke.
We sell Chrysler Outboard manuals on the MarineEngine.com site. |
Jim Billups
Visitor
| | Posted on Friday, January 18, 2008 - 11:14 pm: |
|
Hi, just acquired the following: Chrysler Outboard Corp. military 4 cylinder, 32in3 engine: mfg. 3-71, Manual: 7M-5-2805-203-14 & 24P. Serial J065799. Stock #: FSN-2805-068-7512. Looks good. Want to adapt it to a serious log splitter (currently using a 20hp Kohler engine. Want to know any info as far as parts, manuals, etc. If it doesn't look like I can use it, it is up for grabs. Jim 760.742.1948 |
poocher
New member
Username: poocher
Post Number: 1
Registered: 01-2008
| | Posted on Sunday, January 27, 2008 - 12:14 pm: |
|
I have a Chrysler 9.9 horse motor and am looking for information about it. Model # 94 HD Serial # 1084 What year is it and can u recommend a service center in southern Wisconsin or at least a place to purchase parts? |
stephen19851209
New member
Username: stephen19851209
Post Number: 1
Registered: 03-2008
| | Posted on Sunday, March 23, 2008 - 08:21 pm: |
|
i have a chrysler sailor force 250 serial #1008 and model #91h4d im tryin to find out why the water wont spit out of the motor.if anyone knows let me know |
stephen19851209
New member
Username: stephen19851209
Post Number: 2
Registered: 03-2008
| | Posted on Sunday, March 23, 2008 - 08:27 pm: |
|
does anyone know where to d/l pdf manuels? |
Steve Sauder
Visitor
| | Posted on Saturday, April 12, 2008 - 08:05 pm: |
|
Hello, I just ran across this site as I was looking for info on a generator I purchased used from a friend. It is a Chrysler. Military model 2AO16-3. 16 c.i. , serial#- N-92635. Mnf. date, 5-72. It runs great - it just won't iddle. From the manual I found on here it looks like I am missing a spring, just behind the throttle lever. I took a big spring, hooked it on & tried it. That makes it iddle ( some what) but when I put a load on it, it didn't speed up on it's own - should it? Any help on where to find more info, where to find the right spring would be much apreciated. Thanks, Steve |
bub
Visitor
| | Posted on Sunday, April 13, 2008 - 01:01 pm: |
|
i have a 70 hp chrysler not sure what year exacly. the model number is 707hf-701hf serial number is 19492.the prop is mangled need to get new one can you help |
steve sauder
Visitor
| | Posted on Sunday, April 13, 2008 - 04:13 pm: |
|
do questions get answered on here? I see a list of them but none have been answered. thanks |
dave_myers
Advanced Member
Username: dave_myers
Post Number: 38
Registered: 11-2006
| | Posted on Sunday, April 13, 2008 - 07:27 pm: |
|
Hi Steve,
To answer your question re replies to posts...
Yes they do get answered if there is someone on the site who knows the answer. Some times it may take a while for someone to come along and read the question..
Also, This site is primarily for "Old Marine Inboards" even though some outboards and others have been helped out.
The site for most other types of marine propulsion is on the discussion board at... http://www.marineengine.com/discus/
Cheers,
Dave |
steve sauder
Visitor
| | Posted on Tuesday, April 15, 2008 - 06:15 am: |
|
thanks Dave |
shawn kuntz
Visitor
| | Posted on Saturday, April 19, 2008 - 11:01 pm: |
|
1984 chrysler is leaking water at exhaust gasket I believe. It is leaking below the spark plugs, basically the very bottom gasket. Can I use any goop to try to seal this? Will this cause problems with acceleration? My boat steadily increases in speed. As it gets going faster the motor will start to "take off" but the initial acceleration is terrible. |
brian jividen
Visitor
| | Posted on Tuesday, May 27, 2008 - 09:02 pm: |
|
I am looking for a carburetor for a 12.9 chrysler engine model 122ha. If anyone knows where I could find one I would appreciate the info. |
brian schiller
Visitor
| | Posted on Tuesday, July 22, 2008 - 05:28 pm: |
|
hi my name is brian i have a 1969 chrysler engin 55 hp i need parts can any one help i need starter and coil pack things i hope there is some help out there thanks |
paulgeurts
Visitor
| | Posted on Wednesday, August 13, 2008 - 08:25 pm: |
|
I have chrysler 25 hp outboard model# 252h4h could any body tell me the year thanks |
handler
New member
Username: handler
Post Number: 1
Registered: 09-2008
| | Posted on Wednesday, September 03, 2008 - 02:49 pm: |
|
I'll be darned if I can't get a straight answer. What's the oil fuel ratio for the chrysler 62-HA (6hp?) |
andrew
Moderator
Username: andrew
Post Number: 937
Registered: 11-2001
| | Posted on Wednesday, September 03, 2008 - 03:00 pm: |
|
Handler,
This board is for old inboard motors, like the antique one lungers you see in the drawing at the top of this page. It's not intended for questions and answers about outboards of any kind.
You could try one of the many outboard motors discussion boards such as the Chrysler category on MarineEngine.com .
Thanks. |
alfred
New member
Username: alfred
Post Number: 1
Registered: 09-2008
| | Posted on Saturday, September 06, 2008 - 01:20 am: |
|
have a crown chrysler M-27 R engin complete to prop are parts still obtainable for this engin and are books availible?? |
Stefan Wozniak
Visitor
| | Posted on Tuesday, October 14, 2008 - 12:23 pm: |
|
I have a air compressor ( military surplass )and it is a 8 cubic inch 4 cycle 1 cylinder engine. This thing is in perfect shape except when I tried to get it running I discovered the intake manifold was broke at the head. Part # on manifold is 9786E26-1 and the rest of the stats are: NSN-2805-00-068-7510 Serial # is MO43795 and it looks like Mil Model 1A08-111( roman numeral 3) . Does anybody know anything about this thing or how I can get parts,this thing is really cool and is built well and it says it's built by Chrysler Marine Motors HELP !!!
Stefan, 989-358-0810 Northern Michigan |
Parker Gray
Visitor
| | Posted on Wednesday, October 29, 2008 - 04:10 pm: |
|
I have a smooth running Chysler 6 hp, mod. 62B8J. The prop shaft and drive shaft were recently broken (someone hit a rock with the prop). Does anyone have these parts or an old motor to sell for the parts? Thanks Please email me. Parker |
bbq101
Visitor
| | Posted on Friday, January 30, 2009 - 12:39 am: |
|
hello Andrew..i have a FSN 2805-072-4871..2 cyd
4cycle 16 ci/mo#2A016 3..i would like to know
what tiep of eng. it is awiscon/onan....?if you can help..ty.. roger in so.cal.. |
Bryant Nicoson
Visitor
| | Posted on Tuesday, March 10, 2009 - 06:19 pm: |
|
I have a 1976 Chrysler 90 hp outboard. Rebuilt the fuel pump and carbs (3), tuned up. Idles well, but won't take any throttle. I can increase RPM by rotating the coil though. What do I need to check or adjust? (Ran OK last season, but wasn't dependable). |
sigurd1208
Visitor
| | Posted on Friday, March 27, 2009 - 03:59 am: |
|
Hello
My name is Sigurdur and i have a Crysler outboard motor 45 hp. if i can get the electrical viring diagram (original)i'd think i can get it to working. can somone help?
thank´s |
dave maclean
Visitor
| | Posted on Tuesday, May 26, 2009 - 12:24 pm: |
|
Hello,
I have a 72' Chrysler 20 Hp with electric start. It starts great, but seems to run really rich. Can anyone tell me how to adjust it properly?
Thanks a bunch,
Dave [email protected] |
Walter Kirkland
Visitor
| | Posted on Monday, June 22, 2009 - 10:25 pm: |
|
I am looking for any kind of information on a small 2 cycle engine I have just aquired. The tag on the engine says 2 Cycle Industrial Engine by Crysler Outboard Corp. It shows Engine Model 58011 and Engine Serial 34583. Built in Hartford Wisconsin. I do not know the HP rating or year of manufacture. Would love to get some literature. |
ray edmondson
Visitor
| | Posted on Sunday, July 05, 2009 - 02:13 am: |
|
can anyone tell me what year my 20hp chrysler outboard was made. the model no 202hd and serial no 4725. also what fuel /oil ratio it should use ? ? thanks heaps .
ray. |
DAVID RUPP
Visitor
| | Posted on Tuesday, July 21, 2009 - 07:46 pm: |
|
I HAVE A CHRYSLER 9.2 HP MODEL 9741 SERIAL 2049 I CANT FIND ANYTHING ON THE YR ALSO WHEN THE KEY IS LET OFF THE START INTO THE RUN POSITION IT STOPS RUNNING WILL ONLY RUN IF THE KEY IS IN THE START POSITION CAN ANYONE HELP |
DAVID RUPP
Visitor
| | Posted on Tuesday, July 21, 2009 - 10:49 pm: |
|
i have found this is a 1967 |
John Mark
Visitor
| | Posted on Monday, August 10, 2009 - 04:24 pm: |
|
What year is myChrysler model 62HD ser.6436. and what is the carb adjustment? Thank you John |
James Holl
Visitor
| | Posted on Thursday, October 08, 2009 - 05:26 pm: |
|
I have a 1978 chrysler 45hp outboard motor and need a starter. Does anyone know the model# of the starter? Also I need a choke for it if anyone has that model too I would appreciate it. |
Richard Smith
Visitor
| | Posted on Tuesday, October 27, 2009 - 08:29 pm: |
|
I have an "Onan" 1.5 KW military surplus generator with a "Chrysler Marine Engine" manufactured in 12/72. The engine is a twin-cylinder, 16 cubic inch gasoline powered. Stock # FSN 2805 072 4871, Serial #N, Military model - 2A016 III, Manual - TM5-2805-257--14 & 24P. I need a rocker arm for the intake valve }}however it still runs on one cylinder if you can believe it. Any information appreciated.
Thanks - Rick |
doubleu.sea
Visitor
| | Posted on Thursday, April 08, 2010 - 06:31 am: |
|
hey i have a 7.5
sometimes i give it a run and then goes shitty
whys that? |
floyd borthwick
Visitor
| | Posted on Wednesday, April 14, 2010 - 01:32 pm: |
|
how and where can i find parts for Mil. Mod. 2A016-3 Chrysler Outboard Corp 16 ci. This is a surplus military generator. I'm in bad need of a fuel pump or kit. |
Ron Splatt
Visitor
| | Posted on Sunday, May 02, 2010 - 08:04 pm: |
|
I recently purchased a 56 lyman with a 1966 Chrysler 45 hp electric start. They did not have
key for the ignition. I was wondering if anyone knows where I might get a key.
Thanks.
Ron |
alex trollop
Visitor
| | Posted on Monday, July 12, 2010 - 01:07 pm: |
|
hey i have 1978 4hp chrysler model# 42h8d and i need part number F10096 it is the bolt that holds the carb. bowl does anyone have the part that i could buy from them thanks |
George Hatzi
Visitor
| | Posted on Tuesday, July 13, 2010 - 06:54 pm: |
|
Hi. I have a 1973 120HP Chrysler Outboard and the last few times I've used it, there has been some yellow fluid that has stuck to the boat's well and when the motor is out of the water it appears on the leg. It smells like a mixture of water and the oil/fuel mix. It definitely isn't gearbox oil as the gearbox oil is clean and doesn't smell like fuel. Can anyone help with where it may be coming from. Thank you, George |
Keith Krall
Visitor
| | Posted on Sunday, July 18, 2010 - 10:48 pm: |
|
I have an oldie, 1973 6 hp and broke a bushing in the accelerator control arm and looking for parts...I know it's a long shot, but any ideas? Thank you in advance. Keith |
bruce
Senior Member
Username: bruce
Post Number: 233
Registered: 07-2002
| | Posted on Monday, July 19, 2010 - 06:28 pm: |
|
Try AOMCI.org and associated links. |
Norm Fjellstrom
Visitor
| | Posted on Monday, July 26, 2010 - 11:43 pm: |
|
I am looking for a carb kit,impeller and a fuel pump for a 1974 20 hp chrysler out board,please help |
hayssem elsleiman
Visitor
| | Posted on Thursday, September 09, 2010 - 08:43 am: |
|
i have an american force 85 hp outboard motor and the only number i can find is 856a9e any help with finding out what year the motor was manufactured? |
Larry Arnold
Visitor
| | Posted on Thursday, September 09, 2010 - 02:27 pm: |
|
I have a 2A016-3 type motor, I,m have a hard time finding spark plugs for it. The TM5 2805 25714&24P doesn't give any part No's. If I could get a Manufactors part number or if there are any coversions that have been made to get past the explosive safe type plug it will be great help. |
mick morris
Visitor
| | Posted on Saturday, October 02, 2010 - 05:20 am: |
|
i have 85 horsepower crysler in good working order for sale $4,ooo.oo
phone 0438276950 |
Torbjorn Hiltunen
Visitor
| | Posted on Wednesday, November 17, 2010 - 03:35 pm: |
|
I have a 1970 70 HP Chrysler outboard motor. I cant get the gear to engage if I don't shut down the engine first. I have to start with the engine engaged to be able to run the boat, Does anyone know what is the solution ? If engine closesd it works but running not. |
bvw
New member
Username: bvw
Post Number: 1
Registered: 01-2011
| | Posted on Monday, January 10, 2011 - 05:34 am: |
|
Hi. i have a 5hp chrysler outboard mod 54hd. I am a newbie and would like to know if it have a water pump or how its cooling works cause I have started it in the water but there is no sign of water cooling?? please help me.. |
ffortson
New member
Username: ffortson
Post Number: 1
Registered: 02-2011
| | Posted on Wednesday, February 09, 2011 - 09:29 am: |
|
i have a lot of 3 cyl chrysler used parts for sale.to inquire what i have my e-mail is [email protected] |
andrew
Moderator
Username: andrew
Post Number: 1118
Registered: 11-2001
| | Posted on Wednesday, February 09, 2011 - 09:43 am: |
|
This forum is for early style inboard engines, not for outboards.
You could try posting Chrysler Outboard questions on the MarineEngine.com forum in the Chrysler/Force Section.
For ffortson above with parts for sale, you could post them in the Classifieds.
There are also parts and manuals available for Chrysler outboards at MarineEngine.com at this link.
THanks! |
bruce
Senior Member
Username: bruce
Post Number: 253
Registered: 07-2002
| | Posted on Wednesday, February 09, 2011 - 11:05 pm: |
|
Outboards make nice mail box stands..... |
rbrolfson
New member
Username: rbrolfson
Post Number: 1
Registered: 02-2011
| | Posted on Monday, February 21, 2011 - 11:34 pm: |
|
I have a 1972 chrysler marine corp. military
motor model 2A016 III what was this used to power. |
collin
New member
Username: collin
Post Number: 1
Registered: 11-2011
| | Posted on Sunday, November 27, 2011 - 06:16 pm: |
|
I have a 2 cycle Industrial Engine by Chrysler Outboard Corp Engine model # 70019 and would like to know what it was designed for. and if it is collectable |
Ian Manley
Visitor
| | Posted on Tuesday, January 24, 2012 - 07:56 pm: |
|
I have a great 6hp aorox, 1982 Chrysler Hi Thrust 150 long shaft outboard motor and would like to locate a water pump kit for it and a pull start gear to keep as spars can anyone help? |
joshua63
New member
Username: joshua63
Post Number: 1
Registered: 02-2012
| | Posted on Friday, February 17, 2012 - 12:59 am: |
|
I have a chrysler outbord corp motor 2 cy 16ci 2a016-III on a military air compresor did this come that way or was the engin on somthing ealse? you can email me directly at [email protected] if that is easier for yall thanks for your time |
donald
New member
Username: donald
Post Number: 1
Registered: 02-2012
| | Posted on Saturday, February 18, 2012 - 06:49 am: |
|
looking for starter (pawls) /dogs for 3.5 chysler 1986 model pull start!!! |
joe pokorny
Visitor
| | Posted on Saturday, March 17, 2012 - 03:40 pm: |
|
I have a 1974 Chrysler outboard model 54ha and I do not know the gas oil mixture. I was wondering if anyone knows this. Thanks |
chplate
Visitor
| | Posted on Thursday, May 03, 2012 - 12:08 pm: |
|
I looking a model plate, to 5hp chrysler outboard, any numbers no problem. thx. If someone have, write here pls. |
dmb2828
New member
Username: dmb2828
Post Number: 1
Registered: 05-2012
| | Posted on Thursday, May 10, 2012 - 03:47 am: |
|
Hi
I have twinn turbo perkins 6354 engines ifires upn my boat, when I go to start the starboard engine the key turns but do's not connect, it is springy,whhen i cross the starter the engine am getting power to starter, can anyone help. |
Alvin Burks
Visitor
| | Posted on Wednesday, May 16, 2012 - 09:39 pm: |
|
I have a gas engine on a compressor with a crank rope. Is there a crank assemly that will mount on this unit. It's a NSN 2805-00-068-7510. It's an old 1976 model. |
wesley_e
New member
Username: wesley_e
Post Number: 1
Registered: 06-2012
| | Posted on Sunday, June 17, 2012 - 10:27 am: |
|
i need ign.parts for 5hp chrysler model #54hd.help please |
kevinga
New member
Username: kevinga
Post Number: 1
Registered: 07-2012
| | Posted on Wednesday, July 11, 2012 - 09:27 pm: |
|
does anyone know where i can find a stator for a 1969 Chrysler 85hp Model 8572 serial 1071.
Any help at all would be amazing, i am not having a lot of luck. |
Timber Jim
Visitor
| | Posted on Thursday, December 19, 2013 - 02:31 pm: |
|
Hi, I have a 1976 2 stroke 6HP Chrysler Outboard motor.
I need to replace the plastic pull start coil. It looks as though its attached to the alloy shaft that houses the tension spring so I assume its all the same part. Any ideas of where I can buy one?
Thanks |
michaellanier
Visitor
| | Posted on Sunday, January 19, 2014 - 04:20 am: |
|
I have an 1971 Chrysler outboard gasoline military. Standard 4cyl. 32cu in. Model 4Ao32-!! . Manual TM-5-2805-203-14&24p. Does anyone know if it has any value or interested in buying it |
computech
New member
Username: computech
Post Number: 1
Registered: 08-2014
| | Posted on Friday, August 01, 2014 - 11:56 am: |
|
Hi there
I have a 1978 Chrysler 75hp outboard
The power trim motor is not working and want to buy a replacement. i found new ones online but they are all asking for the orig part number. All i can find cast into the bottom is 106106, but that number doesn't cross ref to anything so they tell me. Any ideas where i might find the part number? thanks for any help you maybe able to provide.   |
dobieone80
New member
Username: dobieone80
Post Number: 1
Registered: 10-2014
| | Posted on Friday, October 10, 2014 - 08:11 pm: |
|
Hello,
I was hoping to find out some information on a 1978 Chrysler 4HP outboard motor i have. It is in great working shape and i have no use for it so i was hoping to sell it but not sure what it is worth. It has a plate on it with ID numbers and all that that say.
CHRYSLER MOD: 42H8D
SER #: 10248
4 BHP AT 5250 R.P.M
CERTIFIED BY B.I.A.
FULL POWER SPEED RANGE
4750 TO 5750 R.P.M
It was in my garage when i bought my house and im looking to sell it. Any information someone can share would be greatly appreciated.
thanks!
   |
ernie
Senior Member
Username: ernie
Post Number: 1893
Registered: 01-2002
| | Posted on Saturday, October 11, 2014 - 09:40 am: |
|
You will have better luck finding the info you are looking for at Aomci.org the Antique Outboard club.
Hope this helps
Ernie |
hanshijc
New member
Username: hanshijc
Post Number: 1
Registered: 07-2015
| | Posted on Friday, July 31, 2015 - 07:56 pm: |
|
Anyone ever heard of a backpack type Skibee fan motor made for skiing made by Chrysler outboard Corp.? I bought one this morning because it was so odd and I had never seen anything like it. |
oneillj714
New member
Username: oneillj714
Post Number: 1
Registered: 08-2015
| | Posted on Sunday, August 30, 2015 - 08:54 pm: |
|
Hello Hanshijc
My grandfather had a Skibee, it ran perfect and was fun to try with cross country skis.
Does your run? |
hanshijc
New member
Username: hanshijc
Post Number: 2
Registered: 07-2015
| | Posted on Sunday, August 30, 2015 - 10:25 pm: |
|
oneillj714,
Unfortunately I haven't had time to play with it much. It rolls over and has compression, so I see no reason why it wouldn't. It has to be a riot to run, I'm guessing. |
