Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Adding some oomph to your magneto

Old Marine Engine » Timers, Magnetos, Ignition » Adding some oomph to your magneto « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Ben Tuppen
Advanced Member
Username: bentuppen

Post Number: 31
Registered: 07-2005
Posted on Saturday, October 18, 2008 - 08:41 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I'd love some advice on reconditioning magnetos.

I've got a Stuart R3M which uses a Lucas SR1 magneto. Having found the one that came with it had a v weak spark, I've got hold of a second. However, after a year of only running occasionally in my shed, this magneto has also now got a v weak spark.

Having compared to a friend's new SR1, both these are clearly well below what's needed, and sure enough don't have the oomph to start my R3M any more. Does anyone have any advice on what might be the cause, how I could get these back to their former glory, and whether you can protect a magneto so if left in a boat etc it won't run out of power.

Thanks very much
Ben
Top of pagePrevious messageNext messageBottom of page Link to this message

Todd Vidgen
Senior Member
Username: todd_vidgen

Post Number: 89
Registered: 03-2008
Posted on Sunday, October 19, 2008 - 04:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Ben , if you are not using your boat,NEVER leave
the magneto in it.Firstly because some low life
will steal it.Secondly and more important.
magnetos hate moisture,When not in use always store
it in a warm dry place
Handle them gently as sharp knocks etc can affect
the magnet which inturn will reduce the spark output
Dont over oil the bearings,check the points for
correct gap and cleaness,the condensor can also
contribute to poor spark(bosch #GD209,available
from most car part shops,early Holden /mitsubishi
will fit)
Make sure the entire unit is super clean inside and out,no cracks in the cap,leads,or the wire from points,condensor etc.
Check for tracking accross the cap
Tests the leads for continuity(leads do brake
down with age and moisture,check the connections
at both ends of the leads
Make sure you have a good earth between the maggy and engine,clean from rust oil,paint etc
Best of luck,Todd
Top of pagePrevious messageNext messageBottom of page Link to this message

Ben Tuppen
Advanced Member
Username: bentuppen

Post Number: 32
Registered: 07-2005
Posted on Saturday, November 01, 2008 - 04:30 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

thanks for that Todd. Lots of good tips. I'll get down to the shed, give it a once-over then leave it somewhere cosy for the winter!

Ben

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration