| Author |
Message |
    
Victor Maessen
Member
Username: mvictor_be
Post Number: 5
Registered: 05-2007
| | Posted on Thursday, May 31, 2007 - 05:42 am: | 
|
This gearbox whas mounted on a wiscinsin engine
Anyone have any info about the unit
I found some numbers on the gearbox
if someone can use this set let me know
MFD
PTA 5-15
BG-232 BH 175
 |
Lawrence T Wolfe
Senior Member
Username: larry_from_maryland
Post Number: 244
Registered: 07-2003
| | Posted on Thursday, May 31, 2007 - 01:57 pm: |
|
It looks to be a wisconsin gearbox. I have the manuel for the ahh,agh,etc series it shows cover number as BH 119, houseing number as BG 149-B. Your engine is smaller so it has differant numbers on a smaller gearbox. I guess you have an aen engine. The PTA letters do show in some wisconsin parts lists. |
Roger DiRuscio
Senior Member
Username: solarrog
Post Number: 245
Registered: 03-2002
| | Posted on Thursday, May 31, 2007 - 02:08 pm: |
|
I have seen a very simular gear box on a bunch of plaster and cement mixers. Is yours an in and out box or does it have reverse?
Roger |
Victor Maessen
Member
Username: mvictor_be
Post Number: 6
Registered: 05-2007
| | Posted on Thursday, May 31, 2007 - 02:57 pm: |
|
Roger, the gear has as far i know only free and forward. the inside has 2 tooth wheels and chains
i have a good simular ingine but the axes is thicker the 4 bolts are not present
 |
Roger DiRuscio
Senior Member
Username: solarrog
Post Number: 246
Registered: 03-2002
| | Posted on Thursday, May 31, 2007 - 03:06 pm: |
|
As a in and out box there will be parts motors around if you need them. were you planning on putting this in a boat? |
Victor Maessen
Member
Username: mvictor_be
Post Number: 7
Registered: 05-2007
| | Posted on Thursday, May 31, 2007 - 05:30 pm: |
|
the compleet unit was standing in a 14ft boat, i'm planning to place the stuart turner P5ME in the boat |
Roger DiRuscio
Senior Member
Username: solarrog
Post Number: 247
Registered: 03-2002
| | Posted on Thursday, May 31, 2007 - 05:41 pm: |
|
I agree with Lawrence above, The engine looks like the AEN, AENL, AENELD series. They were rated up to 9.2 HP depending on RPM setting |
Roger DiRuscio
Senior Member
Username: solarrog
Post Number: 248
Registered: 03-2002
| | Posted on Thursday, May 31, 2007 - 05:45 pm: |
|
oops one too many E's in that last model number |
Victor Maessen
Member
Username: mvictor_be
Post Number: 8
Registered: 05-2007
| | Posted on Thursday, May 31, 2007 - 05:46 pm: |
|
The black one needs just a pull and runs perfect, the other where the gearbox came off is good for parts |
