| Author |
Message |
    
barry
Advanced Member
Username: barry
Post Number: 32
Registered: 02-2006
| | Posted on Friday, December 29, 2006 - 04:27 pm: | 
|
I am aware that essexbrass.com supplies an assortment of pet cocks, grease cups and straight pattern priming cups but not 90 degree priming cups as illustrated.
Does anyone know a source for new 90 degree priming cups?
thanks
Barry
 |
jb_castagnos
Senior Member
Username: jb_castagnos
Post Number: 208
Registered: 07-2002
| | Posted on Friday, December 29, 2006 - 07:58 pm: |
|
How many do you need, I have some Imperial 1/8" 90 degree cups, e-mail me direct. |
bruce
Senior Member
Username: bruce
Post Number: 130
Registered: 07-2002
| | Posted on Saturday, December 30, 2006 - 05:21 am: |
|
Try www.RestorationStuff.com They advertise in Gas Engine magazine Also www.hitnmiss.com |
johnny
Senior Member
Username: johnny
Post Number: 76
Registered: 03-2006
| | Posted on Saturday, December 30, 2006 - 07:28 pm: |
|
Barry,
I am also looking for a 90 degree primer cup. I have purchased a short 90 degree primer cup on Ebay for a Detroit Stationary once before but I now need a 90 degree with the long 1/8 nipple like you show in the photo. I don't want to piece a short one together with other fittings. I prefer to have the original. It's for the Detroit marine engine I just got a few month's ago. The nipple needs to be longer because it goes through the water jacket into the cylinder. I haven't seen any of the long 90 degree primer cups on EBay in the past few months.
Bruce, I don't believe the two places you listed has this kind of primer cup. Thank's any ways. |
jb_castagnos
Senior Member
Username: jb_castagnos
Post Number: 209
Registered: 07-2002
| | Posted on Saturday, December 30, 2006 - 09:02 pm: |
|
Johnny the ones I have are short, your only option is used or silver solder and extension. Barry, send me your mailing address, I'll send one for a sample, your e-mail bounces when I try to return to you. |
