| Author |
Message |
    
gmck62
New member
Username: gmck62
Post Number: 2
Registered: 12-2004
| | Posted on Wednesday, December 01, 2004 - 07:34 pm: | 
|
I am looking for a source for parts for my 1969 pacer 250 hp 327 cid engines . most parts are gm but some hoses ect are pacer marine only. thanks in advance for any help. |
Rusty Boat
Visitor
| | Posted on Monday, February 07, 2005 - 10:45 pm: |
|
GMC-K 62,These hoses should be mostly same as early Crusader, Check with a boat shop near ocean waters,they have the books for older stuff? |
Briuce Allen
Visitor
| | Posted on Thursday, March 03, 2005 - 11:50 am: |
|
What parts are you looking for? I have a matched pair of Pacer 327's which came out of my Pacemaker 39'. I wanted more power and came accross a pair of 350's. The old 327's are good. I am looking for some pacer exhaust manifolds. Any word on where to look for these? |
yachtspecco
Visitor
| | Posted on Wednesday, February 15, 2006 - 11:37 am: |
|
I am running Pacer 185's in my 64 Pacemaker 32. I have converted them both to 4bbl 350's fresh water cooled. Manifolds are the same or close enough to aftermarkets for Crusader log styles available from Sierra, or Osco. It's the elbows that you won't be able to get. Those have been out of production for years. You can adapt and use the later style mixing elbows but you'll need to modify your plumbing slightly. Not a monumental project but some engineering required. |
sgrier
New member
Username: sgrier
Post Number: 1
Registered: 12-2011
| | Posted on Monday, December 19, 2011 - 07:03 pm: |
|
Does anyone know where to locate a 1967 Pacer 250, 327 cid shop manual ? Need to get parts numbers   |
[email protected]
Visitor
| | Posted on Monday, April 11, 2016 - 06:19 pm: |
|
Restoring a 1960 Chris Craft Continental.
It has a "PACER MARINE ENGINE - 185" tag on the value cover. Paperwork I have suggests it is 283 cubic inch v8 but I've little more to go on. Looking for repair manuals. Looking for new carburetor. Looking for any tips and advice available for getting this project rolling. Thanks.
 |
