|
| Author |
Message |
    
jamesosler
Visitor
| | Posted on Monday, January 16, 2006 - 08:23 pm: | 
|
I have an rmp gauge that has two wires blue and red. I wold like to know how to set it up so it works.
Thanks |
peterogborne
Senior Member
Username: peterogborne
Post Number: 285
Registered: 09-2002
| | Posted on Tuesday, January 17, 2006 - 05:45 am: |
|
A bit more info required!!!! |
jamesosler
Visitor
| | Posted on Tuesday, January 17, 2006 - 09:43 pm: |
|
here is some more info
Make: Make Waves Instrument Corp.
The gauge goes to 8000 rpm
When fully apart ther are a blue and black wire very thin that are attached together another set of thin wires yellow and red that are together. Then a singal red wire that goes through a copper plate. Im not sure but it looks like it goes to a light. Then there is a white and black wire that exit the gauge at the back together.
There are no blue and red wires sorry.
The gauge also came out of a 1953 wooden boat. Not sure if it is original to the boart or an add on.
Any help would be great Thanks |
|
|
|
|
