| Author |
Message |
    
Glen R Klingensmith
Member
Username: glenk
Post Number: 6
Registered: 07-2015
| | Posted on Friday, October 23, 2015 - 09:55 pm: | 
|
This is a single cylinder 2 cycle Gray marine engine .I will post pictures tomorrow . I was wandering if this engine can be dated by the serial # 8098 . It has the flywheel with the gib key not the tapered shaft with the nut .Would anyone know were an exhaust manifold could be located . Thank you , Glen |
Ernie
Senior Member
Username: ernie
Post Number: 2150
Registered: 01-2002
| | Posted on Saturday, October 24, 2015 - 01:58 pm: |
|
Is it this style?
http://www.oldmarineengine.com/discus/messages/1/259800.html |
Glen R Klingensmith
Member
Username: glenk
Post Number: 7
Registered: 07-2015
| | Posted on Saturday, October 24, 2015 - 06:11 pm: |
|
Thats not it , I need to take pictures with my daughters ipad . my computer won't let me send pictures . |
miro forest
Senior Member
Username: miro
Post Number: 827
Registered: 11-2001
| | Posted on Saturday, October 24, 2015 - 07:02 pm: |
|
Most Gray engines of that ear , had flanges that connected to the exhaust piping.
The hot cooling water outlet from the engine was usually directed into the piping close to where is leaves the engine.
Since the exhaust piping is specific to each boat and is almost always different, you can use your creative instinct to come up with a workable solution.
Miro |
RichardDurgee
Senior Member
Username: richarddurgee
Post Number: 3689
Registered: 11-2001
| | Posted on Saturday, October 24, 2015 - 09:29 pm: |
|
*
Glen, Can you email photos ?
If so click on my name at left and
send them to me, I'll size them
and post here !
A 4 number Gray I'm interested in
seeing the engine.
* |
RichardDurgee
Senior Member
Username: richarddurgee
Post Number: 3690
Registered: 11-2001
| | Posted on Sunday, October 25, 2015 - 04:22 pm: |
|
*
Glens Gray Photos
* |
Glen R Klingensmith
Member
Username: glenk
Post Number: 8
Registered: 07-2015
| | Posted on Sunday, October 25, 2015 - 06:13 pm: |
|
Thank you Richard for posting the photos , Does anyone have an exhaust manifold that would fit this engine that they would be willing to part with please let me know . Also can you give the year #8098 . Thank you ,Glen |
RichardDurgee
Senior Member
Username: richarddurgee
Post Number: 3691
Registered: 11-2001
| | Posted on Sunday, October 25, 2015 - 11:18 pm: |
|
*
* |
